NXP Manuals (Industrial)

The ISP1362 is a single-chip Universal Serial Bus (USB) On-The-Go (OTG) controller integrated with the advanced NXP Slave Host Controller and the NXP ISP1181B Peripheral Controller.

File format: PDF Size:703 KB

TOPFET PIP3115-B is a logic level MOSFET device from Philips Semiconductors, with a rated voltage of 50 V and a rated current of 8 A. The package type is SOT404.

File format: PDF Size:31 KB

TDA8552T and TDA8552TS are audio power amplifier chips produced by Philips Semiconductors. They support digital volume control and headphone sensing functions, and can be used in portable consumer products, notebook computers and communication equipment.

File format: PDF Size:191 KB

The TDA18271HD is a Silicon Tuner IC designed mainly for terrestrial analog and digital TV reception. It is compatible with all analog and digital TV standards and delivers a low IF signal to a demodulator (for analog TV) and/or channel decoder (for digital TV).

File format: PDF Size:291 KB

TDA18218HN is a Silicon Tuner IC designed for digital terrestrial (DVB-T) TV reception. TDA18218HN integrates the overall tuning function, including selectivity and provides a low-IF output signal. TDA18218HN uses integrated IF filters to support 6 MHz, 7 MHz or 8 MHz channel bandwidths. TDA18218HN requires only one single 16 MHz crystal for clock generation. A clock signal is available on crystal oscillator output pins (XTO_P / XTO_N) to synchronize the channel decoder. TDA18218HN is a low cost Silicon Tuner targeting digital terrestrial applications. TDA18218HN matches the performance of the conventional can tuners. Additionally, the following benefits can be stated: • Easy on-board integration • Drastically reduces: – the size of the tuner function – the power consumption 2. Features I Fully integrated IF selectivity; eliminating the need for external SAW filters I Fully integrated oscillators with no external components I Integrated wideband gain control I Alignment free I RF loop-through for easy implementation in the Set-Top Box (STB) I Integrated die thermal sensor I Single 3.3 V power supply I Low power consumption (750 mW) I Crystal oscillator output buffer (16 MHz) for single crystal applications I I2C-bus interface compatible with 3.3 V and 5 V microcontrollers I Three Standby modes I RoHS packaging 3. Applications I DVB-T Set-Top Box (STB) and TV receiver I System application optimization is done

File format: PDF Size:116 KB

BTA416Y series B and C is 16A three-quadrant triacs, with very high commutation performance, high immunity to dV/dt, isolated mounting base, 2500V RMS isolation voltage and high operating junction temperature. This product is suitable for heating and cooking appliances, non-linear rectifier-fed motor loads, high power motor control (such as vacuum cleaners), electronic thermostats for heating and cooling loads and solid-state relays.

File format: PDF Size:86 KB

This document describes a new generation of high commutation triacs with internal insulation in a TO-220 plastic package. The features include high commutation performance, high immunity to dV/dt, isolated mounting base, 2500V RMS isolation voltage, and high operating junction temperature. It is suitable for heating and cooking appliances, non-linear rectifier-fed motor loads, high power motor control (such as vacuum cleaners), electronic thermostats for heating and cooling loads, solid-state relays, etc.

File format: PDF Size:86 KB

NXP's GPIO expanders are a simple, cost-effective way to monitor and control several peripheral signals. They make it easy for designers to add extra I/O to their design and thereby free up the microprocessor's GPIO for other, more important functions. NXP is the industry leader in serial-interface GPIO expanders, and offers a broad selection of cost-effective, easy-to-use options. NXP's I2C-bus GPIO expanders support three operating modes for data transfer: Standard Mode, with data transfer rates from 0 kbps to 100 kbps, Fast Mode (Fm), with data transfer rates from 0 kbps to 400 kbps, and Fast-mode Plus (Fm+) with data rates from 0 kbps to 1 Mbps. Since the newer Fm+ GPIO are backward compatible all the way back to Standard Mode, it's easy to expand existing designs without changing the bus master device.

File format: PDF Size:3637 KB

This application guide introduces the wide portfolio of advanced solutions that NXP offers for set-top-boxes (STBs). All these solutions are built on our deep understanding of what network operators and manufacturers need.

File format: PDF Size:3415 KB

File format: PDF Size:0 KB

This is a PDF file. The file contains the PCB footprint dimensions information of the SOT1024-2 product.

File format: PDF Size:11 KB

File format: PDF Size:0 KB

This document discusses factors that need consideration when an I2C-bus is used to communicate between two points that do not share a common logic ground potential. I2C logic signals are referenced to a ground level and it is expected that connected devices share that reference. In practice, when an I2C-bus is extended to link devices that are separated by distances exceeding about 1 meter there can be many factors that cause differences in the local ground potential of those devices and that in turn affects the noise margins of the system and can lead to device ratings being exceeded. In other cases, where an I2C-bus could provide an attractive data link there is no possibility for a shared ground reference. Examples include the need to provide safety isolation between the I2C control signals and AC mains power, telephone lines, or patient monitoring medical equipment. In other cases, such as Power over Ethernet, standards require isolation of the grounds. Solutions are provided to deal with ground differences ranging from less than 1 V up to kilovolt levels by using Opto or transformer isolators in the signal path. Key to all solutions is the availability of I2C isolation devices.

File format: PDF Size:398 KB

NXP Voltage Translators (NVT) are used in bidirectional signaling voltage level translation applications for I/O buses with incompatible logic levels. The NVT2001 and NVT2002 are single- and dual-channel voltage translators, operational from 1.0 V to 3.6 V at VCC(A) (low voltage side) and 1.8 V to 5.5 V at VCC(B) (high voltage side) without direction control for open-drain or push-pull I/O devices.

File format: PDF Size:329 KB

The OM11055 is a PCF8883 evaluation board which can be used to demonstrate and evaluate the PCF8883 capacitive proximity switch. The PCB is designed to make it easy to adjust the switch’s sensitivity. The board can be powered using a Mini USB cable or a 9V battery.

File format: PDF Size:280 KB

This document introduces the NXP CATV C-family products, including BGY588C, BGE788C, and CGY888C push-pull amplifiers, BGD712C, CGD944C, and CGD942C power doublers, and BGO807C optical receiver. These products are compliant with the Chinese State Administration for Radio, Film and Television (SARFT) standard and provide excellent linearity, stability, and reliability for cable TV networks in China.

File format: PDF Size:284 KB

NXP's payment solutions offer financial institutions, card manufacturers and consumers a variety of secure, reliable and attractive solutions.

File format: PDF Size:96 KB

File format: PDF Size:0 KB

MicroPak and MicroPak II packages are the world's smallest packages for single-, dual-, and triple-gate logic. They are 65% - 74% smaller than their PicoGate equivalents and offer a larger pad size that provides a more rugged and reliable bond between the device and the PC board.

File format: PDF Size:350 KB

The NXP ARM7 series microcontrollers integrate an LCD controller, with powerful performance and a wide range of applications in consumer, entertainment, industrial/commercial, medical and automotive applications.

File format: PDF Size:175 KB