NXP Manuals (Industrial)

The SA58631 is a one channel audio amplifier in an HVSON8 package. It provides poweroutput of 3 W with an 8 W load at 9 V supply. The internal circuit is comprised of a BTL(Bridge Tied Load) amplifier with a complementary PNP-NPN output stage and standby/mute logic. The SA58631 is housed in an 8-pin HVSON package which has an exposed die attach paddle enabling reduced thermal resistance and increased power dissipation.

File format: PDF Size:149 KB

The SA58635 is a stereo, class-G headphone driver with I2C-bus volume control. The I2C-bus control allows maximum flexibility with digital volume control, independent channel enable and mute control. The output of the SA58635 is referenced around true ground zero. It is designed to operate at the low supply current of 1.5 mA making it battery friendly. A unique power management technique provides class-G power efficiency by using a buck converter to step down the battery supply from a typical l

File format: PDF Size:171 KB

The TDA1565TH is a monolithic power amplifier in a 20-lead heatsink small outline plastic package. It contains two identical 40 W amplifiers. Power dissipation is minimized by switching from SE to BTL mode only when a higher output voltage swing is needed. The device is developed primarily for car radio applications.

File format: PDF Size:259 KB

The SA58672 is a mono, filter-free class-D audio amplifier which is available in a 9 bump WLCSP (Wafer Level Chip-Size Package) and 10-terminal HVSON packages. The SA58672 features shutdown control. Improved immunity to noise and RF rectification is increased by high PSRR and differential circuit topology. Fast start-up time and very small WLCSP package makes it an ideal choice for both cellular handsets and PDAs.

File format: PDF Size:206 KB

The TDA1517 is an integrated class-B dual output amplifier in a plastic single in-line medium power package with fin (SIL9MPF), a plastic rectangular-bent single in-line medium power package with fin (RBS9MPF) or a plastic heat-dissipating dual in-line package (HDIP18).The device is primarily developed for multi-media applications

File format: PDF Size:138 KB

The document describes a 50W LDMOS power transistor for base station applications in the frequency range of 3400 MHz to 3800 MHz. The product features a channel bandwidth of 1.23 MHz, a PAR of 9.7 dB, 23% drain efficiency, and excellent thermal stability and ruggedness.

File format: PDF Size:78 KB

File format: PDF Size:0 KB

The BLF6G10LS-200R is a 200W LDMOS power transistor from NXP, suitable for base station applications in the frequency range of 800MHz to 1000MHz.

File format: PDF Size:83 KB

The BLF6G10LS-200 is a 200 W LDMOS power transistor from NXP Semiconductors for base station applications at frequencies from 800 MHz to 1000 MHz.

File format: PDF Size:84 KB

PX1041A is a high-performance, low-power, four-lane PCI Express electrical PHY that handles the low level PCI Express protocol and signaling. PX1041A PCI Express PHY is compliant to PCI Express Base Specification, Rev. 1.0a, and Rev. 1.1. PX1041A includes features such as Clock and Data Recovery (CDR), data serialization and de-serialization, 8b/10b encoding, analog buffers, elastic buffer and receiver detection, and provides superior performance to the Media Access Control (MAC) layer devices. PX1041A is a 2.5 Gbit/s PCI Express PHY with 4 × 8-bit data PXPIPE interface. Its PXPIPE interface is a superset of the PHY Interface for the PCI Express (PIPE) specification, enhanced and adapted for off-chip applications with the introduction of a source synchronous clock for transmit and receive data. The 4 × 8-bit data interface operates at 250 MHz with SSTL Class I signaling at 2.5 V or 1.8 V. The SSTL signaling is compatible with the I/O interfaces available in FPGA products. PX1041A PCI Express PHY supports advanced power management functions. PX1041AI is for the industrial temperature range (−40 °C to +85 °C).

File format: PDF Size:163 KB

This document is the preliminary specification of Philips Semiconductors 87LPC764 low power, low price, low pin count (20 pin) microcontroller with 4 kB OTP. The product supports I2C serial bus, UART serial communication interface, 10-bit A/D converter and 8-bit D/A converter.

File format: PDF Size:372 KB

This is the specification of Philips Semiconductors 8-bit microcontroller P83C562 and P80C562.

File format: PDF Size:228 KB

The P82B96 is a dual bidirectional I2C bus buffer, featuring isolation capacitance, 400kHz operation, 2V~15V supply voltage range, low power supply current, ESD protection and low power consumption.

File format: PDF Size:163 KB

This data sheet is for the LPC-Stick debugger system. It contains architecture- and device-specific information and all technical data of the system.

File format: PDF Size:136 KB

The LPC2109/2119/2129 are based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, together with 64/128/256 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. With their compact 64-pin package, low power consumption, various 32-bit timers, 4-channel 10-bit ADC, two advanced CAN channels, PWM channels and 46 fast GPIO lines with up to nine external interrupt pins these microcontrollers are particularly suitable for automotive and industrial control applications, as well as medical systems and fault-tolerant maintenance buses. With a wide range of additional serial communications interfaces, they are also suited for communication gateways and protocol converters as well as many other general-purpose applications.

File format: PDF Size:185 KB

BAS19; BAS20; BAS21 are three general purpose diodes from NXP, packaged in SOT23 with a high switching speed, maximum reverse voltage of 100 V, 150 V, 200 V, and maximum forward current of 625 mA.

File format: PDF Size:128 KB

The BB181 is a variable capacitance diode produced by NXP Semiconductors. It is fabricated in planar technology and encapsulated in the SOD523 (SC-79) ultra small plastic SMD package. Its features include excellent linearity, a small package size, and a capacitance range of 1pF to 14pF. This product can be used in satellite tuners for electronic tuning, tunable coupling, and voltage-controlled oscillators (VCO).

File format: PDF Size:44 KB

The BB182 is a planar technology variable capacitance diode with high linearity and excellent matching performance. It is packaged in an ultra small plastic SMD package with low series resistance. It is mainly used for electronic tuning in VHF television tuners and voltage controlled oscillators (VCO).

File format: PDF Size:45 KB

Philips Semiconductors Product specification, BU508AF is a high voltage, high-speed switching npn transistor in a fully isolated SOT199 envelope, primarily for use in horizontal deflection circuits of colour television receivers.

File format: PDF Size:49 KB

This document describes the functionalities of PN532 and the changes between PN532C104 and PN532C106.

File format: PDF Size:700 KB