Philips Manuals (Industrial)

PHILIPS 74LVT2241 buffer

The 74LVT2241 high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The 74LVT2241 device is an octal buffer that is ideal for driving bus lines. The device features two Output Enables (1OE, 2OE), each controlling four of the 3-State outputs. The 74LVT2241 is designed with 30W series resistance in both the High and Low states of the output. This design reduces the line noise in applications such as memory address drivers, c

File format: PDF Size:92 KB

PHILIPS 74ALVT16373 Electronic component

The 74ALVT16373 is a high-performance BiCMOS product designed for VCC operation at 2.5V or 3.3V with I/O compatibility up to 5V. This device is a 16-bit transparent D-type latch with non-inverting 3-State bus compatible outputs. The device can be used as two 8-bit latches or one 16-bit latch. When latch enable (LE) input is High, the Q outputs follow the data (D) inputs. When latch enable is taken Low, the Q outputs are latched at the levels of the D inputs one setup time prior to the Hi

File format: PDF Size:140 KB

PHILIPS 74LV365 buffer

The 74LV365 is a low-voltage CMOS device and is pin and function compatible 74HC/HCT365. The 74LV365 is a hex non-inverting buffer/line driver with 3-State outputs. The 3-State outputs (nY) are controlled by the output enable inputs (OE1, OE2). A HIGH on OEn, causes the outputs to assume a high impedance OFF-state.

File format: PDF Size:153 KB

PHILIPS 74F534 flip-flop

The 74F534 is an 8-bit edge-triggered register coupled to eight 3-State output buffers. The two sections of the device are controlled independently by the Clock (CP) and Output Enable (OE) control gates. The register is fully edge-triggered. The state of each D input, one setup time before the Low-to-High clock transition is transferred to the corresponding flip-flop

File format: PDF Size:120 KB

PHILIPS 74F257A multiplexer

The 74F257A has four identical 2-input multiplexers with 3-State outputs which select 4 bits of data from two sources uncer control of a common Select (S) input. The I0a inputs are selected when the common Select input is Low and the I1n inputs are selected when the common Select input is High. Data appears at the outputs in true non-inverted form from the selected inputs. The 74F257A is the logic implementation of a 4-pole, 2-position switch where the position of the switch is determined

File format: PDF Size:118 KB

PHILIPS 74ALVCH16843 Electronic component

The 74ALVCH16843 has two 9

File format: PDF Size:124 KB

PHILIPS 74LVT162373 transparent D-type latch

The 74LVT162373 is a high-performance BiCMOS product designed for VCC operation at 3.3 V.

File format: PDF Size:159 KB

PHILIPS 74LV367 buffer

The 74LV367 is a low-voltage CMOS device and is pin and function compatible 74HC/HCT367. The 74LV367 is a hex non-inverting buffer/line driver with 3-State outputs. The 3-State outputs (nY) are controlled by the output enable inputs (1OE, 2OE). A HIGH on nOE, causes the outputs to assume a high impedance OFF-state.

File format: PDF Size:152 KB

PHILIPS 74LVT16543A transceiver

The 74LVT16543A is a high-performance BiCMOS product designed for VCC operation at 3.3V. The device can be used as two 8-bit transceivers or one 16-bit transceiver. The 74LVT16543A contains two sets of eight D-type latches, with separate control pins for each set. Using data flow from A to B as an example, when the A-to-B Enable (nEAB) input and the A-to-B Latch Enable (nLEAB) input are Low, the A-to-B path is transparent.

File format: PDF Size:134 KB

PHILIPS 74LVT543 transceiver

The 74LVT543 is a high-performance BiCMOS product designed for VCC operation at 3.3V. This device contains two sets of D-type latches for temporary storage of data flowing in either direction. Separate Latch Enable (LEAB, LEBA) and Output Enable (OEAB, OEBA) inputs are provided for each register to permit independent control of data transfer in either direction. The outputs are guaranteed to sink 64mA.

File format: PDF Size:142 KB

PHILIPS 74F540_541 buffer

The 74F540 and 74F541 are octal buffers that are ideal for driving bus lines or buffer memory address registers. The outputs are capable of sinking 64mA and sourcing up to 15mA, producing very good capacitive drive characteristics. The devices feature input and outputs on opposite sides of the package to facilitate printed circuit board layout.

File format: PDF Size:120 KB

PHILIPS 74LV251 multiplexer

The 74LV251 is a low-voltage Si-gate CMOS device and is pin and function compatible with 74HC/HCT251. The 74LV251 is an 8-input multiplexer with 8 binary inputs (I0 to I7), an output enable input (OE) and three select inputs (S0, S1, S2). One of the eight binary inputs is selected by the select inputs and is routed to the outputs (Y, Y). Both outputs are in the high impedance OFF-state (Z) when the output enable input is HIGH, allowing multiplexer expansion by tying the outputs.

File format: PDF Size:156 KB

PHILIPS 74LVT16373A transparent D-type latch

The 74LVT16373A is a high-performance BiCMOS product designed for VCC operation at 3.3V. This device is a 16-bit transparent D-type latch with non-inverting 3-State bus compatible outputs. The device can be used as two 8-bit latches or one 16-bit latch. When enable (E) input is High, the Q outputs follow the data (D) inputs. When enable is taken Low, the Q outputs are latched at the levels of the D inputs one setup time prior to the High-to-Low transition.

File format: PDF Size:125 KB

PHILIPS 74ALVT16245 transceiver

The 74ALVT16245 is a high-performance BiCMOS product designed for VCC operation at 2.5V or 3.3V with I/O compatibility up to 5V.

File format: PDF Size:134 KB

PHILIPS 74LVT240 buffer

The LVT240 is a high-performance BiCMOS product designed for VCC operation at 3.3V. This device is an octal inverting buffer that is ideal for driving bus lines. The device features two Output Enables (1OE, 2OE), each controlling four of the 3-State outputs.

File format: PDF Size:128 KB

PHILIPS 74LVT640 transceiver

The LVT640 is a high-performance BiCMOS product designed for VCC operation at 3.3V. This device is an octal transceiver featuring inverting 3-State bus compatible outputs in both send and receive directions. The control function implementation minimizes external timing requirements. The device features an Output Enable (OE) input for easy cascading and a Direction (DIR) input for direction control.

File format: PDF Size:133 KB

PHILIPS 74ALVCH16823 Electronic component

The 74ALVCH16823 is a 18-bit edge-triggered flip-flop featuring separate D-type inputs for each flip-flop and 3-state outputs for bus oriented applications. Incorporates bushold data inputs which eliminate the need for external pull-up resistors to hold unused inputs. The74ALVCH16823 consists of two sections of nine edge-triggered flip-flops. A clock (CP) input, an output-enable (OE) input, a Master reset (MR) input and a clock-enable( CE) input are provided for each total 9-bit section.

File format: PDF Size:144 KB

PHILIPS 74F258A multiplexer

The 74F258A has four identical 2-input multiplexers with 3-State outputs which select 4 bits of data from two sources under control of a common Select (S) input. The I0n inputs are selected when the Select input is Low and the I1n inputs are selected when the Select input is High. Data appears at the outputs in inverted form.

File format: PDF Size:110 KB

PHILIPS 74ALVT162245 Electronic component

The 74ALVT162245 is a high-performance BiCMOS product designed for VCC operation at 2.5V or 3.3V with I/O compatibility up to 5V. This device is a 16-bit transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions. The control function implementation minimizes external timing requirements. The device features an Output Enable (nOE) input for easy cascading and a Direction (DIR) input for direction control. The 74ALVT162245 is designed with 30W s

File format: PDF Size:130 KB

PHILIPS 74LVT162245B transceiver

The 74LVC16373A and 74LVCH16373A are 16-bit D-type transparent latches featuring separate D-type inputs with bus hold (74LVCH16373A only) for each latch and 3-state outputs for bus-oriented applications. One Latch Enable (LE) input and one Output Enable (OE) are provided for each octal. Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the outputs. These features allow the use of these devices in mixed 3.3 V and 5 V applications.

File format: PDF Size:120 KB

Brands



Products