Industrial Manuals

DS55493�DS75493 is a quad LED segment driver, its characteristics are low voltage operation, low input current, low standby power, display blanking function, output current regulation, quad high gain circuits

File format: PDF Size:107 KB

The product is the EHP-A08L/SUR01-P01 with the model DSE-8L1-002. It has the features of high efficiency and energy saving, high light flux, and it is suitable for applications such as TFT LCD display backlight, decorative lighting, etc.

File format: PDF Size:302 KB

The SP574B/674B/1674B/774B (SPx74B) Series are complete 12-bit successive-approximation A/D converters integrated on a single die with tri-state output latches, an internal reference, clock and a sample-hold.

File format: PDF Size:173 KB

File format: PDF Size:0 KB

EN27C512 is a low-power 512Kbit, 5V-only one-time-programmable (OTP) read-only memory (EPROM). Organized into 64K words with 8 bits per word, it features QuikRiteTM single- address location programming, typically at 20µs per byte. Any byte can be accessed in less than 45ns, eliminating the need for WAIT states in high-performance microprocessor systems. The EN27C512 has separate Output Enable ( OE ) and Chip Enable ( CE) controls which eliminate bus contention issues.

File format: PDF Size:109 KB

Technical Data of 7.6mm 0.3 Inch Micro Bright Seven Segment Displays

File format: PDF Size:219 KB

File format: PDF Size:0 KB

This document describes the electrical properties and maximum rated values of the Netz-Thyristor-Modul Phase Control Thyristor Module TZ 150 N 18.26 N.

File format: PDF Size:59 KB

This document is about Texas Instruments Incorporated and its subsidiaries (TI) products. It mainly introduces the features and characteristics of the products.

File format: PDF Size:598 KB

This document is a data manual for the Texas Instruments (TI) product MSDS 1394, providing important information about the product.

File format: PDF Size:598 KB

This document is a technical manual about the products and services of Texas Instruments Incorporated and its subsidiaries (TI). TI reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, or other intellectual property right.

File format: PDF Size:771 KB

TSB43AB23 is an IEEE 1394a-2000 OHCI PHY/Link Layer controller that features extended resume signaling for compatibility with legacy DV components. It is fully compliant with the 1394 Open Host Controller Interface Specification and supports IEEE Std 1394-1995 and IEEE Std 1394a-2000 standards. The controller provides a high-performance serial bus functionality.

File format: PDF Size:126 KB

This is the datasheet of the 32.0-42.0 GHz GaAs MMIC sub-harmonic image reject mixer from Mimix Broadband. The mixer has a conversion loss of 9.0 dB and 18.0 dB image rejection, and is suitable for Millimeter-wave Point-to-Point Radio, LMDS, SATCOM and VSAT applications.

File format: PDF Size:427 KB

KK74AC623 is a high-performance silicon-gate CMOS Octal 3-State Noninverting Bus Transceiver. It is pin-compatible with the LS/ALS623, HC/HCT623. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALS outputs. The KK74AC623 is a 3-state noninverting transceiver that is used for 2-way communication between data buses. Two separate enables are available. The enable for bus A to B is active-high, the enable for bus B to A is active-low.

File format: PDF Size:293 KB

This document provides information about the functionality, specifications, and dimensions of the ITT Cannon H-99 H Rocker Switch. The switch offers multiple options and features, making it suitable for applications such as appliances and office equipment.

File format: PDF Size:251 KB

This document describes the features and applications of Dynex Semi's DCR390J85 phase control thyristor, including double side cooling and high surge capability.

File format: PDF Size:762 KB

File format: PDF Size:833 KB

This data sheet introduces the features and characteristics, application scenarios of W3030 3 V dual-mode IF cellular receiver.

File format: PDF Size:416 KB

This document describes the features and characteristics of the µPD4481161, µPD4481181, µPD4481321, and µPD4481361 ZEROSB static RAM chips. These chips are fabricated with advanced CMOS technology and feature high speed, low voltage, high density, and wide bit configuration. They are suitable for applications that require synchronous operation and buffer memory.

File format: PDF Size:318 KB

The document introduces the Ultra37000 series CMOS CPLDs products from Cypress Semiconductor Corporation. The products feature In-System Reprogrammable™ (ISR™) capability, allowing reconfiguration through JTAG interface. Additionally, the products offer high density, simple timing model, 3.3V and 5V versions, and programmable bus-hold capabilities.

File format: PDF Size:1734 KB