The 74AHC240 and 74AHCT240 are 8-bit inverting buffer/line drivers with 3-state outputs.
These devices can be used as two 4-bit buffers or one 8-bit buffer. They feature two
output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on
nOE causes the outputs to assume a high-impedance OFF-state. Inputs are over voltage
tolerant. This feature allows the use of these devices as translators in mixed voltage
environments.
The 74ALVC541 is an octal non-inverting buffer/line drivers with 3-state bus compatible
outputs. The 3-state outputs are controlled by the output enable inputs OE0 and OE1.
A HIGH on OEn causes the outputs to assume a high-impedance OFF-state.
The 74F125 provides four non-inverting buffer/line drivers with 3-state outputs. The
3-state outputs (nY) are controlled by the output enable input (nOE). A HIGH at nOE
causes the outputs to assume a high-impedance OFF-state.
The 74F126 provides four non-inverting buffer/line drivers with 3-state outputs. The
3-state outputs (nY) are controlled by the output enable input (nOE). A LOW at nOE
causes the outputs to assume a high-impedance OFF-state.
The 74AXP1G125 is a single buffer/line driver with 3-state output.
Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall
times.
This device ensures very low static and dynamic power consumption across the entire
VCC range from 0.7 V to 2.75 V. It is fully specified for partial power down applications
using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging
backflow current through the device when it is powered down.
The 74HC3G34; 74HCT3G34 is a triple buffer. Inputs include clamp diodes. This enables
the use of current limiting resistors to interface inputs to voltages in excess of VCC.
The 74HC3G07; 74HCT3G07 is a triple buffer with open-drain outputs. Inputs include
clamp diodes. This enables the use of current limiting resistors to interface inputs to
voltages in excess of VCC.
The 74HC2G126; 74HCT2G126 is a dual buffer/line driver with 3-state outputs controlled
by the output enable inputs (nOE). Inputs include clamp diodes. This enables the use of
current limiting resistors to interface inputs to voltages in excess of VCC.
The 74HC7541; 74HCT7541 is an 8-bit buffer/line driver with Schmitt-trigger inputs and
3-state outputs. The device features two output enables (OE1 and OE2). A HIGH on OEn
causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes.
This enables the use of current limiting resistors to interface inputs to voltages in excess
of VCC. Schmitt trigger inputs transform slowly changing input signals into sharply defined
jitter-free output signals.
The 74LV244 is a low-voltage Si-gate CMOS device and is pin and function compatible
with 74HC244 and 74HCT244.
The 74LV244 is an octal non-inverting buffer/line driver with 3-state outputs. The output
enable inputs 1OE and 2OE control the 3-state outputs. A HIGH on nOE causes the
outputs to assume a high impedance OFF-state. The 74LV244 is identical to the 74LV240
but has non-inverting outputs.
The 74LVC16244A; 74LVCH16244A are 16-bit non-inverting buffer/line drivers with
3-state bus compatible outputs. The device can be used as four 4-bit buffers, two 8-bit
buffers or one 16-bit buffer. It features four output enable inputs, (1OE to 4OE) each
controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a
high-impedance OFF-state.
The 74LVT16240A is a high-performance BiCMOS product
designed for VCC operation at 3.3 V.
This device is an inverting 16-bit buffer that is ideal for driving bus
lines. The device features four Output Enables (1OE, 2OE, 3OE,
4OE), each controlling four of the 3-State outputs.
The LVT240 is a high-performance BiCMOS product designed for
VCC operation at 3.3V.
This device is an octal inverting buffer that is ideal for driving bus
lines. The device features two Output Enables (1OE, 2OE), each
controlling four of the 3-State outputs.
The 74F540 and 74F541 are octal buffers that are ideal for driving
bus lines or buffer memory address registers. The outputs are
capable of sinking 64mA and sourcing up to 15mA, producing very
good capacitive drive characteristics. The devices feature input and
outputs on opposite sides of the package to facilitate printed circuit
board layout.