ATMEL Manuals (Industrial)

This document introduces the AT91RM9200-EK evaluation board usage method

File format: PDF Size:772 KB

This user guide introduces the hardware and software design flow of the ATF15xx-DK3 development kit.

File format: PDF Size:2418 KB

This document describes the features and characteristics of a product named Rev. 4235G–8051–08/05. The product is 80C52 compatible and features six 8-bit I/O ports (64 pins or 68 pins versions) or four 8-bit I/O ports (44 pins version), three 16-bit timer/counters, 256 bytes scratch pad RAM, 9 interrupt sources with 4 priority levels. Additionally, the product includes an integrated power monitor, supports ISP (In-System Programming), and has a high-speed architecture.

File format: PDF Size:1029 KB

This document describes the simplified block diagram and features of AVR Butterfly, including ATmega169 AVR microcontroller, 100-segment LCD display, 4Mbit Dataflash, 32kHz oscillator for RTC, 4-way directional button, light sensor, temperature sensor, speaker for sound generation, etc.

File format: PDF Size:88 KB

The AVR32 RISC microcontroller series is a 32-bit RISC microcontroller launched by Atmel, with high performance, low power consumption, rich peripheral interfaces and other features, suitable for embedded Linux, RTOS, real-time system and other applications.

File format: PDF Size:4498 KB

This document introduces the hardware design of DB101, including circuit schematics, PCB layout, bill of materials, etc.

File format: PDF Size:526 KB

This document describes the STK525 dedicated to the AT90USBxxx AVR microcontroller

File format: PDF Size:869 KB

The document introduces the features of ATtiny2313V and ATtiny2313 microcontrollers, including application scenarios, key parameters, power supply voltage, and working frequency.

File format: PDF Size:1821 KB

AT24C1024B is a 1.048576-bit serial electrically erasable and programmable read only memory (EEPROM) organized as 131,072 words of 8 bits each. Its device's cascadable feature allows up to four devices to share a common two-wire bus. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The device provides 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead EIAJ SOIC, 8-lead TSSOP, 8-ball dBGA2 and 8-lead Ultra Thin SAP packages to save space. In addition, the entire family provides 1.8V (1.8V to 3.6V) and 2.5V (2.5V to 5.5V) versions.

File format: PDF Size:1530 KB

AT26F004 is a serial interface Flash memory device produced by ATMEL company. It is suitable for a wide variety of high-volume consumer applications in which program code is shadowed from flash memory into embedded or external RAM for execution. The flexible erase architecture of the AT26F004, with its erase granularity as small as 4 Kbytes, makes it ideal for data storage as well, eliminating the need for a separate storage device in data storage applications.

File format: PDF Size:597 KB

This document describes a high-performance, low-power AVR 8-bit microcontroller with advanced RISC architecture, including 130 powerful instructions, most of which can be executed in a single clock cycle. It has 8KB of in-system self-programmable flash and 512 bytes of EEPROM, as well as various peripheral features such as timers/counters, PWM channels, ADC, and serial interfaces.

File format: PDF Size:2556 KB

AT27C040 is a low-power, high-performance, OTP EPROM, organized as 512K*8 bits. This chip requires only one 5V power supply in normal read mode operation. Any byte can be accessed in less than 70ns, eliminating the need for speed reducing WAIT states on high-performance microprocessor systems. Atmel's scaled CMOS technology provides low active power consumption and fast programming. Power consumption is typically 8mA in active mode and less than 10µA in standby mode. AT27C040 is available in a choice of industry-standard JEDEC-approved one-time programmable (OTP) plastic PDIP, PLCC and TSOP packages. The device features two-line control (CE, OE) to eliminate bus contention in high-speed systems. Atmel's AT27C040 has additional features to ensure high quality and efficient production use. The Rapid Programming Algorithm reduces the time required to program the part and guarantees reliable programming. Typical programming time is 100µs/byte.

File format: PDF Size:292 KB

AT45DB041D is a 2.5V or 2.7V serial-interface Flash memory ideally suited for a wide variety of digital voice-, image-, program code- and data-storage applications. It features flexible erase options, low power dissipation, and hardware and software data protection features.

File format: PDF Size:1423 KB

AT29C040A is a 5V in-system programmable and erasable read-only memory (PEROM) with features such as fast read access time, sector program operation, hardware and software data protection, etc.

File format: PDF Size:347 KB

This document introduces the features of the ATtiny13 series of high-performance, low-power AVR® 8-bit microcontrollers, including advanced RISC architecture, non-volatile program and data storage, peripheral features, special microcontroller features, I/O and packaging, operating voltage, speed, etc.

File format: PDF Size:1415 KB

The AT24C32C/64C is 32,768/65,536 bits of serial electrically erasable and programmable read only memory (EEPROM) organized as 4096/8192 words of 8 bits each. The device’s cascadable feature allows up to 8 devices to share a common 2- wire bus. The device is optimized for use in many industrial and commercial applications where low power and low voltage operation are essential.

File format: PDF Size:634 KB

The document describes the features and characteristics of the AT24C1024B product, including low-voltage operation, internal organization, two-wire serial interface, Schmitt triggers, filtered inputs, bidirectional data transfer protocol, different clock rates, hardware and software data protection, page write mode, random and sequential read modes, self-timed write cycle, high reliability, etc.

File format: PDF Size:1094 KB

File format: PDF Size:0 KB

AT49BV163D(T) is a 2.7-volt 16-megabit Flash memory with features such as single voltage read/write operation, fast read access time, sector erase architecture, fast program and erase time.

File format: PDF Size:497 KB

AT93C46D is a 1024-bit serial electrically erasable programmable read-only memory (EEPROM), organized as 64 words of 16 bits each (when the ORG pin is connected to VCC), and 128 words of 8 bits each (when the ORG pin is tied to ground). The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operations are essential. AT93C46D is available in space-saving 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin mini-MAP (MLP 2x3), 8-lead TSSOP, and 8-lead dBGA2 packages. AT93C46D is enabled through the Chip Select pin (CS) and accessed via a three-wire serial interface consisting of Data Input (DI), Data Output (DO), and Shift Clock (SK). Upon receiving a Read instruction at DI, the address is decoded and the data is clocked out serially on the DO pin. The Write cycle is completely self-timed, and no separate Erase cycle is required before Write. The Write cycle is only enabled when the part is in the Erase/Write state.

File format: PDF Size:877 KB