ATMEL Manuals (Industrial)

ATMEL ATV750/ATV750L handbook

The document introduces a new type of programmable logic device with features such as high-density replacement for discrete logic, high-speed, and low power consumption. The device has 42 inputs and 20 sum terms, providing increased logic flexibility. The output logic is flexible, with 20 flip-flops that can be individually buried or directly output. Multiple feedback paths are available for buried state machines and I/O bus compatibility. The device is reprogrammable and uses a reliable high-speed CMOS EPROM process. It is available in 24-pin and 28-pin packages.

File format: PDF Size:549 KB

ATMEL ATF20V8B handbook

The ATF20V8B is a high performance CMOS (Electrically Erasable) Programmable Logic Device (PLD) that utilizes Atmel's proven electrically erasable Flash memory technology. Speeds down to 7.5 ns and power dissipation as low as 10 mA are offered. All speed ranges are specified over the full 5V ± 10% range for industrial temperature ranges, and 5V ± 5% range for commercial temperature ranges.

File format: PDF Size:530 KB

ATMEL AT94S Secure Series Programmable SLI handbook

The document describes a multichip module containing a field-programmable system-level integrated circuit (FPSLIC™) and secure configuration EEPROM memory. The product features 512 Kbits to 1 Mbit of configuration memory with security protection and in-system programming (ISP). The FPSLIC is an SRAM-based FPGA with an embedded high-performance RISC AVR® core and extensive data and instruction SRAM. It also includes a patented SRAM-based AT40K FPGA with 5,000 to 40,000 gates and FreeRAM™ feature, making it ideal for dynamically reconfigurable and low-power applications. The product utilizes a patented AVR enhanced RISC architecture with 120+ powerful instructions, most of which can be executed in a single clock cycle. It also includes a high-performance hardware multiplier for DSP-based systems and achieves close to 1 MIPS per MHz performance. The product offers up to 36 Kbytes of dynamically allocated instruction and data SRAM, as well as JTAG interface for extensive on-chip debugging support.

File format: PDF Size:257 KB

ATMEL AT76C111 handbook

AT76C111 is a low-power digital camera control chip that integrates DSP and video encoder, supports SDRAM and various storage cards, and can be widely used in consumer digital cameras, portable digital camcorders, industrial vision systems, etc.

File format: PDF Size:45 KB

ATMEL AT6000(LV) Series handbook

This document introduces the features and characteristics of AT6000 series SRAM-based field programmable gate arrays (FPGAs), including high performance, low power consumption, programmable clock options, and independently configurable I/O.

File format: PDF Size:402 KB

ATMEL AT49F080 AT49F080T Data Sheet

This document introduces the features and characteristics of AT49F080, including single voltage operation, fast read access time, internal program control and timer, 16K bytes boot block lockout, fast erase cycle time, byte programming, hardware data protection, data polling to detect end of program, low power dissipation and typical 10,000 write cycles.

File format: PDF Size:99 KB

ATMEL AT45DB021D Manual

This document describes the features of AT45DB021D, AT45DB021D is a 2.7V, serial-interface Flash memory, ideally suited for a wide variety of digital voice-, image-, program code- and data-storage applications.

File format: PDF Size:1554 KB

ATMEL Two-wire Serial EEPROM 512K (65 536 x 8) AT24C512 Manual

AT24C512 is a serial electrically erasable and programmable read only memory (EEPROM) with features of low power and low voltage operation. It has an internally organized structure of 65,536 x 8 bits, with a two-wire serial interface, Schmitt triggers, and filtered inputs for noise suppression. The product supports bidirectional data transfer protocol, compatibility with multiple operating voltages (2.7V to 5.5V, 1.8V to 3.6V) and different frequencies (1 MHz, 400 kHz, 100 kHz). It also features a write protect pin, 128-byte page write mode, self-timed write cycle, high reliability (100,000 write cycles, 40 years data retention), etc. It can be used in industrial and commercial applications.

File format: PDF Size:378 KB

ATMEL AT89C51CC03 handbook

This document describes the features and characteristics of the STC15W408AS series microcontrollers.

File format: PDF Size:2609 KB

ATMEL AT45DB321C Manual

The AT45DB321C is an SPI compatible, serial-interface Flash memory ideally suited for a wide variety of digital voice-, image-, program code- and data- storage applications. The AT45DB321C supports a 4-wire serial interface known as RapidS for applications requiring very high speed operations. Its 34,603,008 bits of memory are organized as 8192 pages of 528 bytes each. In addition to the 33-megabit main memory, the AT45DB321C also contains two SRAM buffers of 528 bytes each. The buffers allow the receiving of data while reprogramming the flash array.

File format: PDF Size:603 KB

ATMEL T98C51CC01 Data Sheet

This document introduces the features and characteristics of the 4129L-CAN product

File format: PDF Size:1928 KB

ATMEL AT28LV256 handbook

File format: PDF Size:0 KB

ATMEL U211B DATA SHEET

The U211B is a bipolar phase control IC with an internal frequency-to-voltage converter, which can be used for speed-regulated motor applications. The device also features integrated load limitation, tacho monitoring and soft-start functions to realize sophisticated motor control systems.

File format: PDF Size:591 KB

ATMEL T89C51RB2/RC2 DATA SHEET

T89C51RB2/RC2 is a high performance FLASH version of the 80C51 8-bit microcontrollers. It contains a 16K or 32Kbytes Flash memory block for program and data. The 16 Kbytes or 32 Kbytes FLASH memory can be programmed either in parallel mode or in serial mode with the ISP capability or with software. The programming voltage is internally generated from the standard VCC pin. The T89C51RB2/RC2 retains all features of the 80C52 with 256 bytes of internal RAM, a 7-source 4-level interrupt controller and three timer/counters. In addition, the T89C51RB2/RC2 has a Programmable Counter Array, an XRAM of 1024 byte, a Hardware Watchdog Timer, a Keyboard Interface, a SPI Interface, a more versatile serial channel that facilitates multiprocessor communication (EUART) and a speed improvement mechanism (X2 mode). Pinout is the standard 40/44 pins of the C52. The fully static design of the T89C51RB2/RC2 allows to reduce system power consumption by bringing the clock frequency down to any value, even DC, without loss of data. The T89C51RB2/RC2 has 2 software-selectable modes of reduced activity and 8 bit clock prescaler for further reduction in power consumption. In the Idle mode the CPU is frozen while the peripherals and the interrupt system are still operating. In the power-down mode the RAM is saved and all other functions are inoperative.

File format: PDF Size:167 KB

ATMEL STK503 USER GUIDE

STK503 user guide introduces the basic features and usage methods of STK503, including STK503 hardware overview, installation, usage methods and troubleshooting

File format: PDF Size:705 KB

ATMEL AT49BV001/AT49LV001/AT49BV001N/AT49LV001N/AT49BV001T/AT49LV001T/AT49BV001NT/AT49LV001NT Battery-Voltage Flash Memory

The AT49BV/LV001(N)(T) is a 3-volt only in-system reprogrammable Flash Memory. Its 1 megabit of memory is organized as 131,072 words by 8 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device offers access times to 70 ns with power dissipation of just 90 mW over the commercial temperature range. When the device is deselected, the CMOS standby current is less than 50 µA.

File format: PDF Size:177 KB

ATMEL AT93C46/AT93C56/AT93C66 3-wire Serial EEPROMs

The AT93C46/56/66 is a three-wire serial EEPROM that provides 1024/2048/4096 bits of storage space and can operate in low-voltage and low-power environments.

File format: PDF Size:139 KB

ATMEL ATmega644/V Preliminary Manual

The document describes a high-performance, low-power AVR® 8-bit microcontroller with advanced RISC architecture and high endurance non-volatile memory segments, as well as various peripheral features.

File format: PDF Size:4725 KB

ATMEL ATmega640/V Manual

2549K-AVR-01/07 is a high performance, low power AVR® 8-bit microcontroller

File format: PDF Size:4016 KB

ATMEL AT28HC256 DATA SHEET

The AT28HC256 is a high-performance Electrically Erasable and Programmable Read Only Memory. Its 256K of memory is organized as 32,768 words by 8 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the AT28HC256 offers access times to 70 ns with power dissipation of just 440 mW. When the AT28HC256 is deselected, the standby current is less than 5 mA.

File format: PDF Size:732 KB

Brands



Products