ATMEL Manuals (Industrial)

AT49BV322D(T) is a 2.7V 32-megabit Flash memory organized as 2,097,152 words of 16 bits each or 4,194,304 bytes of 8 bits each. The x16 data appears on I/O0 - I/O15; the x8 data appears on I/O0 - I/O7. The memory is divided into 71 sectors for erase operations. The device is offered in a 48-lead TSOP and a 48-ball CBGA package. The device has CE and OE control signals to avoid any bus contention. This device can be read or reprogrammed using a single power supply, making it a reliable and compact solution with excellent performance and cost-effectiveness.

File format: PDF Size:495 KB

The AT91SAM7SE-EK evaluation board is a development board for evaluating the AT91SAM7SE microcontroller. The board features various functionalities and interfaces, including memory, clock circuitry, reset circuitry, power supply circuitry, communication interfaces, and expansion slots.

File format: PDF Size:743 KB

File format: PDF Size:0 KB

AT45DB161D is a 2.5-volt or 2.7-volt, serial-interface sequential access Flash memory ideally suited for a wide variety of digital voice-, image-, program code- and data-storage applications. The AT45DB161D supports RapidS serial interface for application-specific fast data transfer, provides flexible erase options, offers low power dissipation and high data retention, and supports hardware and software data protection.

File format: PDF Size:1621 KB

The document describes the features and characteristics of a product, including the ARM7TDMI ARM Thumb processor, internal high-speed flash and SRAM, memory controller, and reset controller.

File format: PDF Size:6516 KB

TS80C52X2 is a high performance CMOS ROM, OTP, EPROM and ROMless versions of the 80C51 CMOS single chip 8-bit microcontroller. The TS80C52X2 retains all features of the 80C51 with extended ROM/EPROM capacity (8 Kbytes), 256 bytes of internal RAM, a 6-source, 4-level interrupt system, an on-chip oscillator and three timer/counters. In addition, the TS80C52X2 has a dual data pointer, a more versatile serial channel that facilitates multiprocessor communication (EUART) and an X2 speed improvement mechanism.

File format: PDF Size:1046 KB

AT45DB081D is a 2.5V or 2.7V serial-interface Flash memory ideally suited for a wide variety of digital voice-, image-, program code- and data-storage applications. The AT45DB081D supports RapidS serial interface for applications requiring very high speed operation.

File format: PDF Size:1632 KB

AT29C010A is a 5-volt-only in-system Flash programmable and erasable read only memory (PEROM). Its 1 megabit of memory is organized as 131,072 words by 8 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device offers access times to 70 ns with power dissipation of just 275 mW over the commercial temperature range. When the device is deselected, the CMOS standby current is less than 100 µA. The device endurance is such that any sector can typically be written to in excess of 10,000 times. To allow for simple in-system reprogrammability, the AT29C010A does not require high input voltages for programming. Five-volt-only commands determine the operation of the device. Reading data out of the device is similar to reading from an EPROM.

File format: PDF Size:427 KB

The TS80C31X2 is a ROMless version of the 80C31 compatible, high-performance CMOS single chip 8-bit microcontroller 80C51. The TS80C31X2 retains all the features of the TSC80C31 with 128 bytes of internal RAM, a 5-source, 4-priority level interrupt system, an on-chip oscillator and two timer/counters. In addition, the TS80C31X2 has a dual data pointer, a more versatile serial channel that facilitates multiprocessor communication (EUART) and a X2 speed improvement mechanism. The fully static design of the TS80C31X2 allows to reduce system power consumption by bringing the clock frequency down to any value, even DC, without loss of data. The TS80C31X2 has 2 software-selectable operating modes, including idle mode, power-down mode and power-off flag mode.

File format: PDF Size:562 KB

File format: PDF Size:0 KB

The AT26DF161A is a serial interface Flash memory device designed for use in a wide variety of high-volume consumer-based applications. It has a flexible erase architecture with a minimum erase granularity of 4 Kbytes, making it ideal for data storage. The physical sectoring and the erase block size make it a good choice for a variety of applications.

File format: PDF Size:688 KB

The AT28C256 is a high-performance electrically erasable and programmable read-only memory. It features fast read access time, automatic page write operation, fast write cycle times, low power dissipation, and more.

File format: PDF Size:564 KB

The document describes an ARM processor with internal high-speed flash, featuring high performance, high-density instruction set, and low power consumption. It also includes 512 KB or 256 KB of internal high-speed SRAM, supports an external bus interface, and has memory and reset controllers.

File format: PDF Size:7512 KB

This document describes a high-performance, low-power AVR® 8-bit microcontroller with advanced RISC architecture, high-endurance non-volatile memory segments, and various peripheral features.

File format: PDF Size:550 KB

This document introduces the features of ATmega328P, including high performance, low power consumption, high endurance non-volatile memory segments, JTAG interface, peripheral features, etc.

File format: PDF Size:6445 KB

This product is a high-performance, low-power AVR® 8-bit microcontroller

File format: PDF Size:6193 KB

The ATmega1280 is a high-performance, low-power microcontroller in the AVR® 8-bit microcontroller family that features 135 powerful instructions, most single-clock cycle execution, 32 x 8 general-purpose working registers, full static operation, up to 16 MIPS throughput at 16 MHz, an on-chip 2-cycle multiplier, 64K/128K/256K bytes of in-system self-programmable Flash, 4K bytes EEPROM, 8K bytes internal SRAM, 10,000 Flash/100,000 EEPROM write/erase cycles, 20 years of data retention at 85°C/100 years of data retention at 25°C, an optional boot code section with independent lock bits, in-system programming by on-chip boot program, true read-while-write operation, software security programming lock, up to 64K bytes optional external memory space, JTAG (IEEE std. 1149.1 compliant) interface, boundary-scan capabilities according to the JTAG standard, extensive on-chip debug support, programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG interface

File format: PDF Size:7497 KB

AT90CAN series is a 32-bit high performance low-power AVR® micro-controller with CAN controller and powerful RISC architecture, 133 single-cycle execution instructions, 32 general purpose registers, 32K/64K/128K bytes of rewritable flash, 1K/2K/4K bytes of EEPROM, 2K/4K/4K bytes of internal SRAM, 1Mbits/s maximum transmission rate at 8 MHz clock frequency, programmable watchdog timer and other features.

File format: PDF Size:5641 KB

Introduces features and characteristics of AVR® 8-bit microcontrollers ATmega325/ATmega3250 and ATmega645/ATmega6450.

File format: PDF Size:2853 KB

ATtiny261/461/861 is a high performance, low power AVR® 8-Bit Microcontroller from Atmel.

File format: PDF Size:2210 KB