RICOH Manuals (Industrial)

The R5463x series is a high-voltage CMOS-based protection IC for over-charge/discharge of rechargeable two-cell Li-ion/Lithium polymer, further include a short circuit protection circuit for preventing large external short circuit current and the protection circuits against the excess discharge-current and excess charge current. Each of these ICs is composed of six voltage detectors, reference units, a delay circuit, a short circuit protector, an oscillator, a counter, and logic circuits. DFN(PLP)1820-6B package is available.

File format: PDF Size:101 KB

The R5462x Series are high voltage CMOS-based protection ICs for over-charge/discharge of rechargeable two-cell Li-ion/Lithium polymer, further include a short circuit protection circuit for preventing large external short circuit current and the protection circuits against the excess discharge-current and excess charge current. Each of these ICs is composed of six voltage detectors, reference units, a delay circuit, a short circuit protector, an oscillator, a counter, and logic circuits. The over-charge detector threshold is high accuracy such as ±10mV(0°C∼50°C). DFN(PLP)1820-6B package is available.

File format: PDF Size:184 KB

R5461K series Li-ion/polymer 2Cell protector IC with alarm function

File format: PDF Size:193 KB

R5460x series Li-ION / POLYMER 2-cell PROTECTOR

File format: PDF Size:638 KB

The R5460x Series are high voltage CMOS-based protection ICs for over-charge/discharge of rechargeable two-cell Li-ion/Lithium polymer. They include a short circuit protection circuit for preventing large external short circuit current and protection circuits against excess discharge-current and excess charge current. Each IC consists of six voltage detectors, reference units, a delay circuit, a short circuit protector, an oscillator, a counter, and a logic circuit. In addition to SOT-23-6 package, DFN(PLP)1820-6 package is also available.

File format: PDF Size:53 KB

The R5432V Series are high voltage CMOS-based protection ICs for over-charge/discharge of rechargeable 3/4/5cell Li-ion/Lithium polymer battery. Each of these ICs is composed of voltage detectors, reference units, a delay circuit, a short circuit protector, an oscillator, a counter, and logic circuits. A more than 6 Cells battery is available by Cascade connection.

File format: PDF Size:158 KB

The R5433V Series are high voltage CMOS-based protection ICs for over-charge/discharge of rechargeable 3/4/5cell Li-ion/Lithium polymer battery. Each of these ICs is composed of ten voltage detectors, reference units, a delay circuit, an oscillator, a counter, and logic circuits. Disconnection between the battery and the protection board can be detected. SSOP-16 package is available.

File format: PDF Size:163 KB

R5434D series are high voltage second protection ICs for 2-5 cells rechargeable Li-ion/Li-polymer batteries.

File format: PDF Size:143 KB

This document is the RN5T614 product specification, which provides detailed information on the features and characteristics of the product

File format: PDF Size:1142 KB

This is a 7-channel power management IC, model number RN5T564, with multiple functional characteristics, including LDO, DCDC, CPU interface, etc., please refer to the attached document for details

File format: PDF Size:796 KB

RN5T562 is a chip that integrates CMOS step-down DC/DC converter and two low dropout regulators (LDO). With some external components such as inductor, capacitors and resistor, it is easy to compose a low ripple, high efficiency step-down DC/DC converter.

File format: PDF Size:1173 KB

RN5T561-0000 is a power management system device launched by Ricoh Electronics. It has multiple functional modules and flexible application modes, which is suitable for various mobile terminals and smart home applications.

File format: PDF Size:1724 KB

RN5T649 is a constant frequency charge pump for white LED application. Its features include output enable/disable, LED current and LDO ON/OFF individually controllable through single wire serial pulse I/F.

File format: PDF Size:1024 KB

This document is about the development specifications of RN5T651 Charge-Pump for White LED and Power Supply. It describes the features and characteristics of the product.

File format: PDF Size:2892 KB

This document is a detailed description of the RN5T652 development specifications, describing the features and characteristics of the product, including charge pump and power supply for white LED.

File format: PDF Size:2347 KB

RN5T653 is a white LED charge pump, output enable / disable, LED current and LDO output voltage can be individually controlled through single wire serial pulse I / F.

File format: PDF Size:1299 KB

File format: PDF Size:0 KB

RN5T659 is a charge pump for white LED, which has a constant frequency and can be individually controlled by single wire serial pulse I/F for output enable/disable, LEDs current and LDOs ON/OFF.

File format: PDF Size:1302 KB

The R2043K/T is a CMOS real-time clock IC connected to the CPU by four signal lines, CE, SCLK, SI, SO, and configured to perform serial transmission of time and calendar data to the CPU. The periodic interrupt circuit is configured to generate interrupt signals with six selectable interrupts ranging from 0.5 seconds to 1 month. The 2 alarm interrupt circuits generate interrupt signals at preset times. As the oscillation circuit is driven under constant voltage, fluctuation of the oscillator frequency due to supply voltage is small, and the time keeping current is small (TYP. 0.45µA at 3V). The oscillation halt sensing circuit can be used to judge the validity of internal data in such events as power-on; The supply voltage monitoring circuit is configured to record a drop in supply voltage below two selectable supply voltage monitoring threshold settings. The 32.768kHz clock output function (N-channel open drain output) is intended to output sub-clock pulses for the external microcomputer. The oscillation adjustment circuit is intended to adjust time counts with high precision by correcting deviations in the oscillation frequency of the crystal oscillator. Since the package for these ICs are TSSOP10G (4.0x2.9x1.0: R2043T) or FFP12 (2.0x2.0x1.0: R2043K), high density mounting of ICs on boards is possible.

File format: PDF Size:462 KB

R2045S/D 4-wire Serial Interface Real Time Clock Module is a real-time clock module, built in CMOS real-time clock IC and crystal oscillator, connected to the CPU by four signal lines, CE, SCLK, SI, and SO, and configured to perform serial transmission of time and calendar data to the CPU.

File format: PDF Size:696 KB