TEXAS Manuals

MAX202 is a TI-launched 5V dual RS-232 line driver/receiver with ±15kV ESD protection, which meets or exceeds the requirements of TIA/EIA-232-F and ITU v.28 standards, operates at 5V VCC supply and can achieve data transmission rates of up to 120 kbit/s.

File format: PDF Size:379 KB

This document introduces the MAX3386E RS-232 transceiver's features, including mixed-voltage system compatibility, enhanced ESD protection, low supply current, high data transmission rate, and low-power shutdown mode.

File format: PDF Size:221 KB

The document introduces MAX232, a dual driver/receiver that includes a voltage generator to supply TIA/EIA-232-F voltage levels from a single 5V supply. It can convert TIA/EIA-232-F inputs to 5V TTL/CMOS levels and TTL/CMOS inputs to TIA/EIA-232-F levels. The product features low supply current, ESD protection, etc.

File format: PDF Size:572 KB

The MAX3318E is a dual-driver, dual-receiver, RS-232-compatible transceiver. The device features auto-power-down plus and enhanced electrostatic discharge (ESD) protection integrated into the chip. Driver output and receiver input are protected to ±15 kV using the IEC 61000-4-2 Air-Gap Discharge method, ±8 kV using the IEC 61000-4-2 Contact Discharge method, and ±15 kV using the Human-Body Model (HBM). The device operates at a data rate of 460 kbps. The transceiver has a proprietary low-dropout driver output stage, enabling RS-232-compatible operation from a 2.25-V to 3-V supply with a dual charge pump. The charge pump require

File format: PDF Size:166 KB

MAX3318 is a dual-driver, dual-receiver, RS-232 compatible transceiver produced by TI company, supports ±15kV ESD protection, operating current 300µA, low power standby mode 1µA, data transmission speed up to 460 kbps.

File format: PDF Size:184 KB

MAX3243E is a 3-V to 5.5-V multichannel RS-232 line driver/receiver with ±15-kV IEC ESD protection. It is a single-chip and single-supply interface for IBM™ PC/AT™ serial port. The device meets or exceeds the requirements of TIA/EIA-232-F and ITU v.28 standards, and operates with a 3-V to 5.5-V VCC supply. MAX3243E features an always-active noninverting receiver output (ROUT2B) and is designed to transmit at a data rate up to 500 kbit/s. Additionally, the device features low standby current (1 µA typical) and external capacitors (4 × 0.1 µF). MAX3243E accepts 5-V logic input and is compatible with a 3.3-V supply. The device is interchangeable with Maxim MAX3243E and features an auto-powerdown feature to disable driver outputs when no valid RS-232 signal is sensed. MAX3243E can be used for battery-powered systems, PDAs, POS terminals, telephone terminals, industrial and medical equipment, and other applications.

File format: PDF Size:654 KB

The MAX3243 is a single-chip single-supply interface that can be used for IBM PC/AT serial ports, meets or exceeds the requirements of TIA/EIA-232-F and ITU v.28 standards, operates with a power supply of 3-V to 5.5-V VCC, has 3 drivers and 5 receivers, supports a data transfer rate of 250 kbit/s, has a low standby current of 1 µA, has external capacitors of 4 × 0.1 µF, can accept 5-V logic input with a 3.3-V supply, has an always-active non-inverting receiver output (ROUT2B), supports an alternative high-speed pin-compatible device (1 Mbit/s) – SNx5C3243, supports serial mouse driveability, and has an auto-powerdown feature that disables driver outputs when no valid RS-232 signal is sensed.

File format: PDF Size:313 KB

MAX3243 is a 3-V to 5.5-V multichannel RS-232 line driver/receiver for the single-chip and single-supply interface for the IBM PC/AT serial port. It meets or exceeds the requirements of TIA/EIA-232-F and ITU v.28 standards and operates with a 3-V to 5.5-V VCC supply. The device consists of three line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin-to-pin. It provides the electrical interface between an asynchronous communication controller and the serial-port connector. This combination of drivers and receivers matches that needed for the typical serial port used in an IBM PC/AT, or compatible. The device has RS-232 bus-pin ESD protection that exceeds ±15-kV using the human-body model (HBM). It is suitable for battery-powered systems, PDAs, notebooks, laptops, palmtop PCs, and hand-held equipment.

File format: PDF Size:313 KB

This document is the datasheet of MAX3238

File format: PDF Size:244 KB

MAX3238E 3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD (HBM) PROTECTION is an RS-232 line driver/receiver IC manufactured by TI company. The chip has ±15 kV ESD (HBM) protection, supports TIA/EIA-232-F and ITU v.28 standards, and operates at 3-5.5V. It supports 400kbit/s transmission speed and has five drivers and three receivers. It also has low standby current (1µA typical), external capacitors (4×0.1µF) and other features.

File format: PDF Size:327 KB

The MAX3237E is a 3-V to 5.5-V multichannel RS-232 1-MBit/s line driver/receiver. The device meets or exceeds the requirements of TIA/EIA-232-F and ITU v.28 standards, and provides ±15 kV – Human-Body Model (HBM), ±8 kV – IEC61000-4-2, Contact Discharge, ±15 kV – IEC61000-4-2, Air-Gap Discharge ESD protection.

File format: PDF Size:234 KB

The MAX3237E is a 3-V to 5.5-V multichannel RS-232 1-MBit/s line driver/receiver that meets or exceeds the requirements of TIA/EIA-232-F and ITU v.28 standards. It features ESD protection, low standby current, external capacitors, support for 5-V logic input and 3.3-V supply, and is designed for interchangeability with Maxim equipment.

File format: PDF Size:234 KB

MAX3232E is a multichannel RS-232 line driver/receiver from TI with ±15kV IEC ESD protection. It can be used for battery-powered systems, PDAs, notebooks, palmtop PCs, etc.

File format: PDF Size:345 KB

The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The device operates at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.

File format: PDF Size:331 KB

MAX232E is a dual driver/receiver with IEC61000-4-2 protection that meets or exceeds TIA/RS-232-F and ITU Recommendation V.28. It operates from a single 5V power supply with 1.0μF charge-pump capacitors and can operate up to 120 kbit/s. It includes two drivers and two receivers with low supply current and ESD protection for RS-232 bus pins.

File format: PDF Size:359 KB

The MAX232 is a voltage converter produced by Texas Instruments

File format: PDF Size:430 KB

File format: PDF Size:430 KB

This document introduces an operational amplifier with 2-kV ESD protection, suitable for a wide range of voltages, and features low power consumption, low input bias and offset parameters, and wide input voltage range.

File format: PDF Size:690 KB

This datasheet is about LM224, LM324, LM2902 four operational amplifiers, these operational amplifiers have 2kV ESD protection, wide supply voltage range, low supply current, ground included common mode input voltage range, low input bias current and offset voltage, etc.

File format: PDF Size:606 KB

LM118/218/318 precision fast operational amplifiers

File format: PDF Size:334 KB