National Manuals

National LMV1031-20 handbook

The LMV1031-20 is an amplifier for internal 3-wire analog microphones and external preamplifiers.

File format: PDF Size:679 KB

National LMV761/LMV762 handbook

LMV761/LMV762 is a low-voltage, high-precision comparator with push-pull output

File format: PDF Size:336 KB

National LMV1012 Analog Series handbook

The LMV1012 is an audio amplifier series for small form factor electret microphones. This series is designed for applications requiring high signal integrity in the presence of ambient or RF noise, such as cellular communications. The LMV1012 audio amplifiers operate over a 2.2V to 5.0V supply voltage range with fixed gains and offer excellent THD, gain accuracy, and temperature stability compared to JFET microphones. The LMV1012 series enables a two-pin electret microphone solution, providing compatibility with the existing JFET market. It is offered in extremely thin 4-bump micro SMD packages suitable for electret condenser microphones (ECM).

File format: PDF Size:485 KB

National LMV101/102/105/110 handbook

File format: PDF Size:0 KB

National LMX2531 handbook

The LMX2531 is a low power, high performance frequency synthesizer system that includes a fully integrated delta-sigma PLL and VCO with a fully integrated tank circuit. The third and fourth poles are also integrated and also adjustable. Also included are integrated ultra-low noise and high precision LDOs for the PLL and VCO which give higher supply noise immunity and more consistent performance. When combined with a high quality reference oscillator, the LMX2531 generates very stable, low noise local oscillator signals for up and down conversion in wireless communication devices. The LMX2531 is a monolithic integrated circuit, fabricated in an advanced BiCMOS process. There are actually several different versions of this product, for which the primary difference is frequency range. Device programming is facilitated using a three-wire MICROWIRE Interface that can operate down to 1.8 volts. Supply voltage range is 2.8 to 3.2 Volts. The LMX2531 is available in a 36 pin 6x6x0.8 mm Lead-Free Leadless Lead-frame Package (LLP). Target Applications n 3G Cellular Base Stations (WCDMA, TD-SCDMA,CDMA2000) n 2G Cellular Base Stations (GSM/GPRS, EDGE, CDMA1xRTT) n Wireless LAN n Broadband Wireless Access n Satellite Communications n Wireless Radio n Automotive n CATV Equipment n Instrumentation and Test Equipment n RFID Readers Features Multiple Frequency Options Available

File format: PDF Size:571 KB

National LMX2525 handbook

LMX2525 is a highly integrated, high performance, low power frequency synthesizer system optimized for dual-band Japan PDC mobile handsets.

File format: PDF Size:217 KB

National LMX2522/LMX2532 handbook

The LMX2522/LMX2532 PLLatinum™ frequency synthesizer system with integrated VCOs is designed for use in Korean PCS (K-PCS) and Korean Cellular (K-Cellular) cellular phones and CDMA (1xRTT, IS-95) mobile phones.

File format: PDF Size:173 KB

National LMX2505 handbook

LMX2505 is a highly integrated, high performance, low power frequency synthesizer system optimized for dual-band Japan PDC mobile handsets. Using a proprietary digi- tal phase locked loop technique, LMX2505 generates very stable, low noise local oscillator signals for up and down conversion in wireless communications devices. LMX2505 includes dual voltage controlled oscillators (VCOs) for the upper and lower Japan PDC frequency bands, a loop filter, and a fractional-N RF PLL based on a delta sigma modulator. In concert these blocks form a closed loop RF synthesizer system. The RF synthesizer system supports two frequency bands: PDC1500 and PDC800. Serial data is transferred to the device via a three-wire MICROWIRE interface (DATA, LE, CLK). Operating supply voltage ranges from 2.5 V to 3.3 V. LMX2505 features low current consumption: 10 mA at 2.8 V when operating in the PDC800 mode. LMX2505 is available in a 28-pin leadless leadframe pack- age (LLP).

File format: PDF Size:211 KB

National LMX2502/LMX2512 handbook

LMX2502 and LMX2512 are highly integrated, high performance, low power frequency synthesizer systems optimized for Korean PCS and Korean Cellular CDMA (1xRTT, IS-95) mobile handsets.

File format: PDF Size:168 KB

National LMX2487 handbook

LMX2487 3.0 GHz - 6.0 GHz High Performance Delta-Sigma Low Power Dual PLLatinum Frequency Synthesizers with 3.0 GHz Integer PLL

File format: PDF Size:841 KB

National LMX2471 handbook

The LMX2471 is a low power, high performance delta-sigma fractional-N PLL with an auxiliary integer-N PLL. The device is fabricated using National Semiconductor’s advanced BiC-MOS process. With delta-sigma architecture, fractional spur compensation is achieved with noise shaping capability of the delta-sigma modulator and the inherent low pass filtering of the PLL loop filter. Fractional spurs at lower frequencies are pushed to higher frequencies outside the loop bandwidth. Unlike analog compensation, the digital feedback techniques used in the LMX2471 are highly resistant to changes in temperature and variations in wafer processing. With delta-sigma architecture, the ability to push close in spur and phase noise energy to higher frequencies is a direct function of the modulator order. The higher the order, the more this energy can be spread to higher frequencies. The LMX2471 has a programmable modulator up to order four, which allows the designer to select the optimum modulator order to fit the phase noise, spur, and lock time requirements of the system. Programming is fast and simple. Serial data is transferred into the LMX2471 via a three line MICROWIRE interface (Data, Clock, Load Enable). Nominal supply voltage is 2.5 V. The LMX2471 features a typical current consumption of 5.6 mA at 2.5 V. The LMX2471 is available in a 24 lead 3.5 X 4.5 X 0.6 mm package. Features n Low power, high performance delta-sigma fractional-N PLLn Auxiliary integer-N PLLn Fabricated using National Semiconductor’s advanced BiC-MOS processn Noise shaping capability of the delta-sigma modulatorn Inherent low pass filtering of the PLL loop filtern Energy can be spread to higher frequenciesn Fast and simple programming

File format: PDF Size:436 KB

National LMX2470 handbook

The LMX2470 is a low power, high performance delta-sigma fractional-N PLL with an auxiliary integer-N PLL. It is fabricated using National Semiconductor’s advanced BiCMOS process. The delta-sigma architecture allows for fractional spur compensation by utilizing the noise shaping capability of the delta-sigma modulator and the low pass filtering of the PLL loop filter. This pushes fractional spurs at lower frequencies to higher frequencies outside the loop bandwidth. The digital feedback techniques used in the LMX2470 are resistant to changes in temperature and variations in wafer processing, unlike analog compensation. The ability to push close in spur and phase noise energy to higher frequencies is directly related to the modulator order, with higher orders allowing for more energy spread to higher frequencies. The LMX2470 has a programmable modulator with a maximum order of four, allowing the designer to select the optimal modulator order for the system's phase noise, spur, and lock time requirements. Programming is simple and fast using a three line MICROWIRE interface. The LMX2470 operates at a nominal supply voltage of 2.5V and has a typical current consumption of 4.1mA. It is available in a 24 lead 3.5 X 4.5 X 0.6 mm package.

File format: PDF Size:434 KB

National LMX2978 handbook

The LP2978 is a 50 mA, fixed-output voltage regulator designed to provide ultra low-dropout and low noise in battery powered applications. Using an optimized VIP™ (Vertically Integrated PNP) process, the LP2978 delivers unparalleled performance in all specifications critical to battery-powered designs: Dropout Voltage: Typically 120 mV @ 50 mA load, and 7 mV @ 1 mA load. Ground Pin Current: Typically 350 µA @ 50 mA load, and 75 µA @ 1 mA load. Enhanced Stability: The LP2978 is stable with output capacitor ESR as low as 5 mΩ, which allows the use of ceramic capacitors on the output. Sleep Mode: Less than 1 µA quiescent current when ON/OFF pin is pulled low. Smallest Possible Size: SOT-23 package uses absolute minimum board space. Precision Output: 1% tolerance output voltages available (A grade). Low Noise: By adding a 10 nF bypass capacitor, output noise can be reduced to 30 µV (typical).

File format: PDF Size:497 KB

National LMX2430/LMX2433/LMX2434 handbook

LMX2430/LMX2433/LMX2434 PLLatinum™ Dual High Frequency Synthesizer for RF Personal Communications

File format: PDF Size:917 KB

National LMX2377U handbook

LMX2377U is a ultra-low power dual frequency synthesizer from Linear Technology. It adopts a proprietary digital phase lock technique and can generate very stable, low noise control signals for UHF and VHF voltage controlled oscillators. The device features synchronous or asynchronous powerdown mode, and typically consumes 3.5 mA at 3.0V. LMX2377U is available in 20-Pin TSSOP, 24-Pin CSP and 20-Pin UTCSP packages.

File format: PDF Size:3161 KB

National LMX2370/LMX2371/LMX2372 handbook

The LMX237X family of monolithic, integrated dual frequency synthesizers, including prescalers, is designed to be used as a first and second local oscillator for dual mode or dual conversion transceivers.

File format: PDF Size:222 KB

National LMX2364 handbook

The LMX2364 is a high-performance PLLatinum fractional frequency synthesizer that integrates a 2.6 GHz fractional frequency synthesizer and an 850 MHz low power integer-N frequency synthesizer. It is designed for use in the local oscillator subsystem of a radio transceiver, providing stable and low noise control signals for UHF and VHF voltage controlled oscillators.

File format: PDF Size:674 KB

National LMX2354 handbook

The LMX2354 is a radio frequency frequency synthesizer manufactured by National Semiconductor. It is fabricated using National’s 0.5 μ ABiC V silicon BiCMOS process and consumes only 7.0 mA of power. The operating frequency range is 2.5 GHz to 550 MHz. The product uses quadruple modulus prescalers and modulo 15 or 16 fractional compensation circuitry in the RF divider to provide a continuous divide ratio of 80 to 32767 in 16/17/20/21 (1.2 GHz–2.5 GHz) fractional mode and 40 to 16383 in 8/9/12/13 (550 MHz–1.2 GHz) fractional mode.

File format: PDF Size:391 KB

National LMX2353 handbook

The LMX2353 is a fractional N frequency synthesizer with 2.5 GHz frequency range, 2.7V - 5.5V operating voltage and 4.5 mA typical current consumption. It supports 16 levels programmable charge pump current.

File format: PDF Size:215 KB

National LMX2350/LMX2352 handbook

LMX2350/LMX2352 is a low power frequency synthesizer produced by National Company, with a working frequency range of 2.5GHz/550MHz and 1.2GHz/550MHz. It is manufactured using National's 0.5µ ABiC V sili- con BiCMOS process, and has the characteristics of low power consumption and high stability

File format: PDF Size:384 KB

Brands



Products