ANALOG Manuals

ANALOG DEVICES ADR130 handbook

This document is a detailed ADR130 data sheet, which contains the product features, application scenarios, pin configuration and other information.

File format: PDF Size:751 KB

ANALOG DEVICES REF19x Series: Precision Micropower Low Dropout Voltage References Data Sheet

This document describes the features and characteristics of the Precision Micropower, Low Dropout Voltage References REF19x series, including temperature coefficient, output current, supply current, and initial accuracy.

File format: PDF Size:498 KB

ANALOG DEVICES ADCMP361 handbook3

File format: PDF Size:0 KB

ANALOG DEVICES ADCMP563/ADCMP564: Dual High Speed ECL Comparators Data Sheet

ADCMP563/ADCMP564 are high-speed differential ECL comparators produced by Analog Devices. They have a propagation delay of 700ps, a propagation delay dispersion of 75ps, an input common range of -2.0V to +3.0V, solid-state input protection, differential latch control, internal latch pull-up resistors, power supply rejection ratio greater than 85dB, a minimum pulse width of 700ps, 1.5GHz equivalent input rise time bandwidth, a typical output rise/fall time of 500ps, ESD protection>4kV HBM,>200V MM, and programmable hysteresis.

File format: PDF Size:216 KB

ANALOG DEVICES AD834 handbook

The AD834 is a monolithic, laser-trimmed four-quadrant analog multiplier intended for use in high frequency applications, with features such as high precision, low distortion and low power consumption. It features a gain-symmetric dual op amp circuit with differential inputs and differential outputs, and is suitable for high frequency signal processing applications such as high speed real time computation, wideband modulation and gain control, signal correlation and RF power measurement, voltage controlled filters and oscillators, linear keyers for high resolution television and wideband true RMS.

File format: PDF Size:345 KB

ANALOG DEVICES AD584 handbook (1)

This is the AD584 precision voltage reference data sheet, providing four programmable output voltages, 10.000 V, 7.500 V, 5.000 V and 2.500 V, using laser trimming technology, high precision, no external components, temperature coefficient is 15 ppm/°C, the package form is 8-pin TO-99 and 8-lead PDIP.

File format: PDF Size:509 KB

ANALOG DEVICES AD534 handbook

AD534 is a precision analog multiplier produced by AD. It uses internal trimming technology, with a maximum allowed error of ±0.25%. All input terminals (X, Y, and Z) are differential and high impedance, supporting [(X1-X2)(Y1-Y2)/10V]+Z2 transfer function. The input terminal supports ±10V input voltage, the gain can be adjusted by the external adjustable resistor, the gain range is 1-100, the noise design is 90µVrms, the working frequency is 10Hz to 10kHz, and has excellent long-term stability. AD534 is mainly used in high-quality analog signal processing, differential ratio and percentage computation, algebraic and trigonometric function synthesis, wideband, high peak rms-to-dc conversion, precise voltage controlled oscillator and filter.

File format: PDF Size:375 KB

ANALOG DEVICES AD632 handbook

The AD632 is an internally trimmed monolithic four-quadrant multiplier/divider. It features pretrimmed to ±0.5% maximum 4-quadrant error, differential, high impedance inputs, adjustable scale factor for up to ×10 gain, low noise design, and low cost monolithic construction. It is suitable for high-quality analog signal processing, differential ratio and percentage computations, algebraic and trigonometric function synthesis, and accurate voltage controlled oscillators and filters.

File format: PDF Size:276 KB

ANALOG DEVICES AN-245 Application Note

File format: PDF Size:544 KB

ANALOG DEVICES ADCMP370/ADCMP371 handbook(1)

The ADCMP370/ADCMP371 are general-purpose comparators with input offset voltages of 9 mV (maximum) and low power consumption, which make them ideal for battery-powered, portable equipment. The ADCMP371 has a push-pull output.

File format: PDF Size:181 KB

ANALOG DEVICES AD633: Low Cost Analog Multiplier Data Sheet

The AD633 is a functionally complete, four-quadrant, analog multiplier. It includes high impedance, differential X and Y inputs, and a high impedance summing input (Z). The low impedance output voltage is a nominal 10 V full scale provided by a buried Zener. This product features low cost, 8-lead SOIC and PDIP packages, and no external components are required.

File format: PDF Size:604 KB

ANALOG DEVICES AN-269 handbook

File format: PDF Size:92 KB

ANALOG DEVICES AD580: High Precision 2.5 V IC Reference Data Sheet (Rev B 2004-08-01-)

The AD580 is a high precision, 2.5 V IC reference chip launched by Analog Devices. The chip adopts a 3-pipe structure and integrates a precision temperature compensation circuit. The output voltage is 2.5V, and the input voltage range is 4.5-30V. AD580 has excellent temperature stability and long-term stability. Its output voltage changes within ±0.4% in the working temperature range. At 25℃, the long-term stability is 25μV/month.

File format: PDF Size:190 KB

ANALOG DEVICES AD628: High Common-Mode Voltage Programmable Gain Difference Amplifier Data Sheet (Rev G 2007-04-01-)

This document is the technical manual of AD628 high common-mode voltage programmable gain difference amplifier. AD628 is a precision difference amplifier that combines excellent dc performance with high common-mode rejection.

File format: PDF Size:481 KB

ANALOG DEVICES ADCMP608: Rail-to-Rail Fast Low Power 2.5 V to 5.5 V Single-Supply TTL/CMOS Comparator Data Sheet (Rev 0 2007-04-01-)

This datasheet provides detailed information on the features and characteristics of the ADCMP608, including operating voltage range, input range, output range, power consumption, and package.

File format: PDF Size:253 KB

ANALOG DEVICES AD736: Low Cost Low Power True RMS-to-DC Converter Data Sheet (Rev H 2007-02-01-)

The AD736 is a low power, precision, monolithic true rms-to-dc converter. It is laser trimmed to provide a maximum error of ±0.3 mV ± 0.3% of reading with sine wave inputs. Furthermore, it maintains high accuracy while measuring signals with crest factors as high as 5.

File format: PDF Size:573 KB

ANALOG DEVICES AD1991: Class D/1-Bit Audio Power Output Stage Data Sheet (Rev 0 2003-06-01-)

AD1991 is a digital audio power amplifier produced by Analog Devices.

File format: PDF Size:202 KB

Brands



Products