ST Manuals (Industrial)

ST TN1215 TS1220 TYN612 TYN812 TYN1012 Sensitive standard 12 A SCRs handbook

TN1215, TS1220, TYN612, TYN812, TYN1012 are a series of 12A SCRs released by ST. Features include high switching frequency, protection against overvoltage and overcurrent, and are suitable for use in electric tools and kitchen appliances.

File format: PDF Size:151 KB

ST Z01 Standard 1A Triacs handbook

Z01 series is ST's standard 1A triac, suitable for general purpose AC switching applications. Features are: On-state rms current, IT(RMS) 1 A ; Repetitive peak off-state voltage, VDRM/VRRM 600 or 800 V ; Triggering gate current, IGT (Q1) 3 to 25 mA

File format: PDF Size:125 KB

ST BTA08 BTB08 T810 T835 Snubberless logic level standard 8 A Triacs handbook

This document describes the features and characteristics of the BTA08, BTB08, and T8 series triacs. They are suitable for general purpose AC switching and can be used in applications such as static relays, heating regulation, and induction motor starting circuits. The series offers high voltage, high temperature, and high surge current capabilities, making them suitable for use in high voltage and high temperature environments.

File format: PDF Size:146 KB

ST BTA16 BTB16 T1610 T1635 16 A Snubberless logic level standard Triacs handbook

The BTA16, BTB16, T1610, and T1635 series are Triacs suitable for AC power switching, with features including medium current, low thermal resistance, high voltage rating, and high triggering current.

File format: PDF Size:111 KB

ST BTA24 BTB24 BTA25 BTA26 BTB26 T25 handbook

This document describes the features and characteristics of the BTA24, BTB24, BTA25, BTA26, BTB26, and T25 series triacs, including high current, low thermal resistance, high commutation capability, and applications in static relays, heating regulation, induction motor starting circuits, light dimmers, motor speed controllers, etc.

File format: PDF Size:137 KB

ST BTA40 BTA41 BTB41 40 A standard TRIACs handbook

BTA/BTB40-41 series is a 40A standard TRIAC from ST. It has the characteristics of high current, low thermal resistance, high commutation capability and can be used in static relays, heating regulation, induction motor starting circuits, etc. It can also be used in light dimming, motor speed control and other occasions.

File format: PDF Size:103 KB

ST T1235H 12A TRIACS handbook

T1235H 12A TRIACS are ST's new triacs designed for high temperature environments, with enhanced power loss and thermal dissipation performance, leading to space and cost effectiveness when compared to traditional electro-mechanical solutions.

File format: PDF Size:90 KB

ST ACST8 Overvoltage protected AC switch handbook

ACST8 is a high performance overvoltage protected AC switch produced by STMicroelectronics. It is suitable for home appliances and industrial systems and can drive an induction motor up to 8A. This document provides a detailed introduction of the features of ACST8, including high noise immunity, no need for external overvoltage protection, and the need for fewer power passive components.

File format: PDF Size:169 KB

ST ACST6 Overvoltage protected AC switch handbook

The ACST6 is an overvoltage protected AC switch manufactured by STMicroelectronics. It has low IGT (<10 mA) and TO-220FPAB insulated package: 1500 V rms. It meets IEC 61000-4-5 standards and has high off-state reliability, no external overvoltage protection and high immunity against fast transients. It can drive medium power AC loads, such as universal motor of washing machine drum or compressor for fridge or air conditioner.

File format: PDF Size:180 KB

ST TYNx40 Series 40A SCRS handbook

The TYNx40 series is suitable for applications where in-rush current conditions are critical, such as overvoltage crowbar protection circuits in power supplies, in-rush current limiting circuits, solid state relays (in back to back configuration), welding equipment, high power motor control circuits. Using clip assembly technology, they provide a superior performance in high surge current capabilites.

File format: PDF Size:65 KB

ST X006 0.8 A sensitive gate SCRs handbook

The X006 SCR series is suitable for all applications where the available gate current is limited, thanks to highly sensitive triggering levels. These applications include ground fault circuit interrupters, overvoltage crowbar protection in low power supplies, capacitive ignition circuits, etc. The devices are available in through-hole or surface-mount packages and are optimized for reduced power losses and high reliability in harsh environments.

File format: PDF Size:104 KB

ST Z00607 Standard 0.8 A Triacs handbook

Z00607 is a 0.8A standard type triac produced by STMicroelectronics. It has a low gate triggering current and is suitable for low power AC switching applications.

File format: PDF Size:94 KB

ST FLC21-135A July 2003 - Ed: 6D LOW POWER FIRE LIGHTER CIRCUIT handbook

FLC21-135A is a low power fire lighter circuit. It is based on ST's ASD™ technology, providing a fully integrated function, with high performance and reliability levels, adapted to severe and hot temperature environment. The main features include dedicated thyristor structure for capacitive discharge ignition operation, high pulse current capability, AC or DC operation capability, fast turn-on operation, designed for high ambient temperature etc.

File format: PDF Size:72 KB

ST ACS108 Overvoltage protected AC switch (ACS ) handbook

The ACS108 is an AC switch with overvoltage protection, using overvoltage crowbar technology to meet IEC 61000-4-5 surge requirements. It has high noise immunity against static dV/dt and IEC 61000-4-4 burst. It does not require external protection snubber or varistor, reducing component count by up to 80%. It interfaces directly with the micro-controller and supports connection of several alternating current switches on the same cooling pad. It is suitable for alternating current on/off static switching in appliances and industrial control systems, as well as driving low power high inductive or resistive loads.

File format: PDF Size:140 KB

ST LIC01 Series September 2000 - Ed: 7B LIGHT IGNITION CIRCUIT handbook

The LIC01 series is a high-performance switch driver voltage trigger. It is suitable for high-voltage sodium lamp, lamp flashing circuit, metal halide lamp and other applications. The product is manufactured using high-performance planar diffusion technology, and has high surge current capacity and excellent reliability.

File format: PDF Size:127 KB

ST Z04 Standard 4 A Triacs handbook

File format: PDF Size:0 KB

ST X04 Series handbook

The X04 SCR series is suitable for all applications where the available gate current is limited, such as capacitive discharge ignitions, motor control in kitchen aids, overvoltage crowbar protection in low power supplies.

File format: PDF Size:201 KB

ST FLC10-200H/B handbook

The FLC10-200H/B is a product specially developed by ST for high power capacitance discharge operation. It is mainly used in gas lighters or ignitors such as cookers, gas boilers and gas hobs. Based on ST's ASD™ technology, it provides a fully integrated function with high performance and reliability levels, adapted to severe and hot temperature environment.

File format: PDF Size:111 KB

Brands



Products