ATMEL Manuals (Industrial)

The ATV750B is a high-performance and flexible high-density programmable logic device with twice the performance of most other 24-pin programmable logic devices. Increased product terms, sum terms, flip-flops and output logic configurations translate into more usable gates. High-speed logic and uniform, predictable delays guarantee fast in-system performance.

File format: PDF Size:742 KB

This document introduces the features and characteristics of AT49BV008A(T) and AT49BV8192A(T), including 2.7V to 3.6V read/write operation, fast read access time, internal erase/program control, sector architecture, fast sector erase time, byte/word programming, hardware data protection, DATA polling for end of program detection, and low power dissipation

File format: PDF Size:251 KB

The document describes the features and characteristics of the AT49BV8192 and AT49LV8192 flash memories, including low voltage operation, fast read access time, internal erase/program control, sector architecture, fast sector erase time, word-by-word programming, hardware data protection, etc.

File format: PDF Size:153 KB

The document describes the features and characteristics of the AT17LV series FPGA Configuration EEPROMs. It supports multiple operating voltages, can be programmed in-system via a two-wire bus, and is compatible with various FPGAs. The EEPROMs can be cascaded for read-back support and are manufactured using a low-power CMOS process. They offer programmable reset polarity and are available in different package options. The product features low-power standby mode, high reliability, and long data retention.

File format: PDF Size:201 KB

AT93C46/56/57/66 3-Wire Serial CMOS E2PROMs 1K (128 x 8 or 64 x 16) 2K (256 x 8 or 128 x 16) 4K (512 x 8 or 256 x 16) features low voltage and standard voltage operation, user selectable internal organization, 3-wire serial interface, 2 MHz clock rate (5V) compatibility, self-timed write cycle (10 ms max), high reliability endurance: 1 million cycles data retention: 100 years, automotive grade and extended temperature devices available, 8-pin PDIP, JEDEC SOIC, and EIAJ SOIC packages.

File format: PDF Size:200 KB

AT90CAN32/64 is a high-performance, low-power AVR® 8-bit microcontroller from Atmel

File format: PDF Size:241 KB

This document describes the pin configuration and features of a product in PLCC package. The product conforms to Intel LPC Interface Specification 1.0 and has 8M bits of flash memory for platform code/data storage. It supports automated byte-program and sector-erase operations. The product provides two configurable interfaces: Low Pin Count (LPC) Interface and Address/Address Multiplexed (A/A Mux) Interface. The LPC interface supports a 5-signal communication interface with read and write protection for each sector using software-controlled registers. It also includes general-purpose inputs (GPIs) for platform design flexibility. The A/A Mux interface supports fast on-board or out-of-system programming. The power supply specifications are VCC: 3.3V ± 0.3V and VPP: 3.3V and 12V for fast programming. The product is available in a 40-lead TSOP or 32-lead PLCC package, which is an industry-standard package.

File format: PDF Size:225 KB

File format: PDF Size:0 KB

The document describes the features and characteristics of the ATF20V8B high-performance CMOS programmable logic device (PLD), including industry-standard architecture, high-speed electrically erasable programmable logic devices, several power saving options, CMOS and TTL compatible inputs and outputs, etc.

File format: PDF Size:763 KB

AT25080A/160A/320A/640A is 8192/16384/32768/65536-bit serial electrically-erasable programmable read-only memory (EEPROM) with low power consumption and low operating voltage, which is suitable for automotive electronics applications.

File format: PDF Size:389 KB

AT49BV642D(T) is a 2.7-volt 64-megabit Flash memory with features such as single voltage operation, fast read/write speed, erase and program suspend capability.

File format: PDF Size:250 KB

AVR Dragon is a low-cost AVR development tool

File format: PDF Size:10 KB

The AT29C020 is a 5-volt in-system Flash programmable and erasable read-only memory (PEROM) from Atmel.

File format: PDF Size:421 KB

The document describes the features and characteristics of the AT24C02B product. The product is a serial electrically erasable and programmable read-only memory (EEPROM) with low power and low voltage operation. It is organized as 2048 bits of 256 words of 8 bits each. It features a two-wire serial interface, Schmitt trigger, filtered inputs for noise suppression, bidirectional data transfer protocol, and compatibility with different voltage levels. The product supports hardware data protection with a write protect pin, 8-byte (2K) and partial page write modes, and has a high reliability with 1 million write cycles and 100 years of data retention. It is available in various package types including 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2x3), 5-lead SOT23, 8-lead TSSOP, and 8-ball dBGA2. Suitable for many industrial and commercial applications.

File format: PDF Size:611 KB

This application note summarizes the differences between ATmega48, ATmega88 and ATmega168. Refer to the datasheets for detailed information on the devices.

File format: PDF Size:39 KB

This document describes a high-performance, low-power AVR 8-bit microcontroller with advanced RISC architecture and various features, including high endurance non-volatile memory, multiple peripheral features, and special microcontroller features.

File format: PDF Size:278 KB

The AT24HC02B is a serial electrically erasable and programmable read-only memory (EEPROM) with hardware data protection, organized as 256 words of 8 bits each. This product is optimized for low-power and low-voltage operation, suitable for industrial and commercial applications. It supports voltage range from 1.8V to 5.5V, and accessed via a two-wire serial interface.

File format: PDF Size:549 KB

The AT29LV040A is a 3V only in-system Flash Programmable and Erasable Read Only Memory (PEROM) from Atmel.

File format: PDF Size:371 KB

The document describes the features and characteristics of the AT93C46/56/66 series products. It is a serial electrically erasable programmable read-only memory (EEPROM) with low power and low voltage operation. The product provides storage capacities of 1K, 2K, and 4K bits. It features a three-wire serial interface, 2 MHz clock rate, and self-timed write cycle. Additionally, the product offers high reliability and long data retention capability, making it suitable for industrial and commercial applications.

File format: PDF Size:372 KB

AT29LV512 is a 512k 3V single supply Flash programmable erasable read-only memory (PEROM) manufactured by Atmel

File format: PDF Size:360 KB