kingston Manuals

This document describes ValueRAM's 512M x 72-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), registered w / parity, 2Rx8, ECC memory module, based on eighteen 256M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V.This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

File format: PDF Size:151 KB

KVR1333D3N9K2/4G 4GB (2GB 2Rx8 256M x 64-Bit x 2 pcs.) PC3-10600 CL9 240-Pin DIMM Kit is a memory module from ValueRAM that uses JEDEC standard 1.5V power supply and supports DDR3-1333 timing. It has 8 independent internal banks.

File format: PDF Size:238 KB

KHX2133C10D3W1K2/4GX 4GB (2GB 256M x 64-Bit x 2 pcs.) DDR3-2133 CL10 240-Pin DIMM Kit is a Kingston 4GB DDR3-2133 memory that supports Intel® XMP (Extreme Memory Profiles) and JEDEC standard low latency DDR3-1333 timing 9-9-9 1.5V.

File format: PDF Size:250 KB

This document describes ValueRAM’s 256M x 64-bit 2GB (2048MB) DDR2-800 CL6 SDRAM (Synchronous DRAM) memory module.

File format: PDF Size:177 KB

This document describes ValueRAM's 512M x 72-bit (4GB) DDR3L-1333 CL9 SDRAM (Synchronous DRAM), low voltage, Intel® compatibility tested, registered w/parity, 1Rx4 ECC memory module, based on eighteen 512M x 4-bit DDR3L-1333 FBGA components. The SPD is programmed to JEDEC stan- dard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

File format: PDF Size:152 KB

This document describes Kingston's 512M x 64-bit (4GB) DDR3-1333 CL7 SDRAM (Synchronous DRAM), 2Rx8 memory module, based on sixteen 256M x 8-bit FBGA components. This module has been tested to run at DDR3-1333 at a low latency timing of 7-7-7-20 at 1.65V.The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9. This 240-pin DIMM uses gold contact fingers. The JEDEC electrical and mechanical specifications are as follows:

File format: PDF Size:274 KB

This is a 256M x 64-bit (2GB) DDR2-800 CL6 SDRAM (Synchronous DRAM) 2Rx8 240-Pin DIMM memory module

File format: PDF Size:150 KB

This document describes ValueRAM's 512M x 72-bit (4GB) DDR3L-1333 CL9 SDRAM (Synchronous DRAM), low voltage, registered w/parity, 2Rx8, ECC, VLP (very low profile) memory module, based on eighteen 256M x 8-bit DDR3L-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers.

File format: PDF Size:156 KB

This document describes ValueRAM's 128M x 64-bit 1GB (1024MB) DDR2-800 CL5 SDRAM (Synchronous DRAM) memory module.

File format: PDF Size:204 KB

This is a KVR800D2S6/1G 1GB 1Rx8 128M x 64-Bit DDR2-800 CL6 200-Pin SODIMM memory module specification from ValueRAM

File format: PDF Size:95 KB

This is a product description document for Kingston's KHX2400C11D3K4/8GX memory module. It contains information such as the module's capacity, speed, and timing.

File format: PDF Size:327 KB

The KVR1333D3N9K2/2G 2GB (1GB 1Rx8 128M x 64-Bit x 2 pcs.) PC3-10600 CL9 240-Pin DIMM Kit is a ValueRAM memory module that uses DDR3-1333 memory. It has a single capacity of 1GB and a total capacity of 2GB. It supports CAS latency 9, 8, 7, 6. It supports 8 independent internal banks, Burst Length 8 and 4, Asynchronous Reset, On Die Termination using ODT pin, Bi-directional Differential Data Strobe, Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) and Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C.

File format: PDF Size:139 KB

This document describes the features and characteristics of ValueRAM's 8GB DDR3L-1333 CL9 SDRAM (Synchronous DRAM) memory module, including low voltage, registered with parity, 4Rx8 ECC, etc.

File format: PDF Size:151 KB

This document describes the features and characteristics of ValueRAM's 16GB DDR3-1066 CL7 SDRAM registered with parity memory module.

File format: PDF Size:179 KB

KHX1600C8D3K2/4GX is a 4GB DDR3-1600MHz CL8 240-Pin DIMM memory module from Kingston, supports Intel® XMP (Extreme Memory Profiles)

File format: PDF Size:467 KB

SSDNow S50 is a solid-state drive with commercial-grade flash components, 2.5-inch case or half-slim caseless design, ideal for non-PC applications such as gaming, casinos, tollbooths and digital signage.

File format: PDF Size:2208 KB

Kingston's SDHC Video card is designed for HD camcorders and supports 1080i and 1080p video formats, allowing you to shoot long HD videos.

File format: PDF Size:572 KB

KVR1066D3Q8R7SK2/16GI is a memory product in the ValueRAM series from Kingston. It uses the DDR3-1066 standard and has a capacity of 16GB. It is compatible with Intel®.

File format: PDF Size:332 KB

Kingston SDHC Class 10 is designed for professional photographers who need faster speeds to keep pace with their evolving equipment. It allows users to easily capture sequential shots that used to be a challenge due to the speed limitations of memory cards. With speeds up to 20MB/s read and 15MB/s write, the SDHC Ultimate Class 10 is ideal for anyone who uses their digital equipment for serious photography or video and makes it easy to capture HD video.

File format: PDF Size:294 KB

KVR800D2N6K2/4G is a ValueRAM memory module with a capacity of 4GB and DDR2-800 CL6 SDRAM technology.

File format: PDF Size:240 KB