MOTOROLA Manuals
MOTOROLA MPS4250 handbook
This data sheet provides detailed parameters of the MPS4250 model, including maximum rated voltage, maximum rated current, total device power dissipation, operating temperature range, thermal resistance, etc.
File format: PDF Size:56 KB
MOTOROLA MPS4124 handbook
This document is about the datasheet of MPS4124/D, which introduces the features and characteristics of the product, including maximum ratings, thermal characteristics, electrical characteristics, etc.
File format: PDF Size:59 KB
MOTOROLA MJW21192 MJW21191 handbook
MJW21191 and MJW21192 are bipolar power transistors manufactured by Motorola, specifically designed for power audio output or high power drivers in audio amplifiers.
File format: PDF Size:153 KB
MOTOROLA MJW16212* handbook
MJW16212 is a state-of-the-art SWITCHMODE bipolar power transistor. It has 1500 V collector-emitter breakdown capability, typical dynamic desaturation specified (new turn-off characteristic), application-specific state-of-the-art die design, fast switching (200 ns inductive fall time and 2000 ns inductive storage time), low saturation voltage (0.15 V at 5.5 A collector current and 2.5 A base drive), low collector-emitter leakage current (250 µA max at 1500 V VCES), high emitter-base breakdown capability (8.0 V min, for high voltage off drive circuits)
File format: PDF Size:292 KB
MOTOROLA MJW16206 handbook
This is a technical datasheet for MJF16206 and MJW16206
File format: PDF Size:344 KB
MOTOROLA MJW16110*/MJW16110* handbook
MJ16110/MJW16110 is a bipolar power transistor launched by Motorola. Its maximum collector-emitter sustaining voltage is 400V, and its maximum collector-emitter breakdown voltage is 650V. This transistor is specially designed for half-bridge and full-bridge offline converters, and has good dynamic saturation characteristics and rugged RBSOA capability.
File format: PDF Size:416 KB
MOTOROLA MJW16018*/MJW16018* handbook
This data sheet provides the maximum ratings for the 1.5 kV SWITCHMODE series bipolar power transistors, including collector-emitter voltage, collector-emitter saturation voltage, emitter-base voltage, emitter-base saturation current, collector current, and emitter current.
File format: PDF Size:368 KB
MOTOROLA MJW16010A* handbook
This datasheet provides parameters of 1kV SWITCHMODE series bipolar power transistors, including reverse-biased SOA, switching times with inductive loads, saturation voltages, leakage currents, etc.
File format: PDF Size:363 KB
MOTOROLA MJ16010 MJW16010 MJ6012 MJW16012 handbook
These transistors are designed for high-voltage, high-speed, power switching in inductive circuits where fall time is critical. They are particularly suited for line-operated switchmode applications. The MJ16012 and MJW16012 are selected high gain versions of the MJ16010 and MJW16010 for applications where drive current is limited. • Switching Regulators • Fast Turn-Off Times – TC = 100°C • Inverters 50 ns Inductive Fall Time (Typ) • Solenoids 90 ns Inductive Crossover Time (Typ) • Relay Drivers 800 ns Inductive Storage Time (Typ) • Motor Controls • 100�C Performance Specified for: • Deflection Circuits Reverse-Biased SOA with Inductive Loads Switching Times with Inductive Loads Saturation Voltages Leakage Currents
File format: PDF Size:550 KB
MOTOROLA MC10E404/MC100E404 handbook(1)
File format: PDF Size:0 KB
MOTOROLA MC10E404/MC100E404 datasheet(1)
The MC10E404/100E404 is a 4-bit differential AND/NAND device. The differential operation of the device makes it ideal for pulse shaping applications where duty cycle skew is critical. Special design techniques were incorporated to minimize the skew between the upper and lower level gate inputs. Because a negative 2-input NAND function is equivalent to a 2-input OR function, the differential inputs and outputs of the device also allow for its use as a fully differential 2 input OR/NOR function. The output RISE/FALL times of this device are significantly faster than most other standard ECLinPS devices resulting in an increased bandwidth. The differential inputs have clamp structures which will force the Q output of a gate in an open input condition to go to a LOW state. Thus, inputs of unused gates can be left open and will not affect the operation of the rest of the device. Note that the input clamp will take affect only if both inputs fall 2.5V below VCC.
File format: PDF Size:69 KB
MOTOROLA MC10E337/MC100E337 handbook
MC10E/100E337 is a 3-bit registered bus transceiver with scan.
File format: PDF Size:119 KB
MOTOROLA MC10E336/MC100E336 handbook
The MC10E/MC100E336 is an integrated circuit that contains three bus transceivers with both transmit and receive registers.
File format: PDF Size:115 KB
MOTOROLA MC100LVE310/MC100E310 handbook(1)
The MC100LVE310 is a low voltage, low skew 2:8 differential ECL fanout buffer designed with clock distribution in mind. The device features fully differential clock paths to minimize both device and system skew. The LVE310 offers two selectable clock inputs to allow for redundant or test clocks to be incorporated into the system clock trees. The MC100E310 is pin compatible to the National 100310 device. The MC100LVE310 works from a –3.3V supply while the MC100E310 provides identical function and performance from a standard –4.5V 100E voltage supply.
File format: PDF Size:80 KB
MOTOROLA MC100LVE310/MC100E310 datasheet(1)
The MC100LVE310 is a low voltage, low skew 2:8 differential ECL fanout buffer designed with clock distribution in mind. The device features fully differential clock paths to minimize both device and system skew. The LVE310 offers two selectable clock inputs to allow for redundant or test clocks to be incorporated into the system clock trees. The MC100E310 is pin compatible to the National 100310 device. The MC100LVE310 works from a –3.3V supply while the MC100E310 provides identical function and performance from a standard –4.5V 100E voltage supply.
File format: PDF Size:132 KB
MOTOROLA MC10E256/MC100E256 handbook(1)
The MC10E/100E256 is a 3-bit 4:1 multiplexer with transparent latches and differential outputs. When the Latch Enable (LEN) is LOW, the latch is transparent, and output data is controlled by the multiplexer select controls. A logic HIGH on LEN latches the outputs. The Master Reset (MR) overrides all other controls to set the Q outputs LOW.
File format: PDF Size:70 KB
MOTOROLA MC10E256/MC100E256 datasheet(1)
This data sheet provides data for the MC10E/100E256, including pin definitions, function table and logic diagram.
File format: PDF Size:70 KB
MOTOROLA 8-Bit scannable register MC10E241 MC100E241 handbook(2)
File format: PDF Size:0 KB
MOTOROLA 8-Bit scannable register MC10E241 MC100E241 handbook(1)
The MC10E/100E241 is an 8-bit shiftable register. Unlike a standard universal shift register such as the E141, the E241 features internal data feedback organized so that the SHIFT control overrides the HOLD/LOAD control. This enables the normal operations of HOLD and LOAD to be toggled with a single control line without the need for external gating. It also enables switching to scan mode with the single SHIFT control line. The eight inputs D0-D7 accept parallel input data, while S-IN accepts serial input data when in shift mode. Data is accepted a setup time before the positive-going edge of CLK; shifting is also accomplished on the positive clock edge. A HIGH on the Master Reset pin (MR) asynchronously resets all the registers to zero.
File format: PDF Size:69 KB